Replacement Hardware Kit for Trailer Hitches Curt 13306

Question

Question:

CAN I BUY A REPLACEMENT KIT

asked by: Steve B

0

Expert Reply:

Yes you can order replacement hardware with # RHK for the Curt hitch 13306 which is now part # C13397.

expert reply by: Jameson C

0

Answer 1

Yes, we have all of the hardware you will need to install the Curt 11829 hitch. You will want to go to the right hand side of the product page for the Replacement Hardware Kit for Trailer Hitches item #RHK you were looking at. You will see an…

view full answer...

Answer 2

Yes, we have a replacment hardware kit available. You need to use part #RHK. On our product page, all you need to do is add the hitch model number and select the manufacturer in the drop down window. Then add to cart. Orders 1 kit.

view full answer...

Answer 3

The same part reference #RHK is used for many different Replacement Hardware Kits for many different brands and models of trailer hitch. The kits can include bolts, nuts, spacers and a bolt leader (fishwire) for installation. When ordering one of the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Replacement Hardware Kit for Trailer Hitches Curt 13306

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching