Tonneau Cover for 2020 Chevy Silverado 2500 Short Bed Towing Fifth Wheel

Question

Question:

I have a 2020 Silverado 2500 and I pull a 5th wheel. I need a roll up tonneau that has low and narrow rails so I have as much room as possible between the sides and top of the bed. When making tight turns on uneven ground the Pin Box gets very close to the top edge of the bed. What other choices would you recommend in the $500.00 range?

asked by: Mike M

1

Helpful Expert Reply:

The best option that covers all of the things you mentioned is the Truxedo Lo Pro tonneau part # TX573301 for your 2020 Chevy Silverado 2500 short bed. Its lower profile like you need, has narrower rails and also fits your budget.

expert reply by: Jameson C

1

Answer 1

We do have tonneau covers that will be better when hauling a 5th wheel. Folding covers are not the best option because when folded up it sits above the bed rails quite a bit. This could result in damage to your trailer, the tonneau and your 2019…

view full answer...

Answer 2

The Pace Edwards Switchblade retractable tonneau part #PE63CV that fits your 2022 Chevy Silverado 2500 short bed can only be all the way open or all the way closed. So for a similar cover that lets you retract the cover at different intervals…

view full answer...

Answer 3

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 4

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 5

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

Hey Brett, yes the Yakima Overhaul Ladder Rack part #Y01151-5955 is a fit for the Retrax tonneau cover that fits your 2024 GMC Sierra 3500. This is a really great choice for a ladder rack and it looks like you bought it yesterday so it would work…

view full answer...

Answer 12

I recommend the RetraxPRO XR Hard Tonneau Cover #RTT-80485 and Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955 as the best combination for your 2024 GMC Sierra 3500 long bed. The ladder rack will mount to the t-slot channels in the…

view full answer...