Replacement Hubs for Karavan 2004 Double PWC Trailer
Question:
Can you tell me if this assembly will work on a 2004-2005 Karavan double PWC trailer?
asked by: Susan I
Expert Reply:
In order to determine which hubs will work on your 2004-2005 Karavan jetski trailer you will need to know the axle capacity, bolt pattern and the number on the bearings that are inside your current hub. I've found some similar trailers in my research that use a # L44649 inner and outer bearing and a 5 on 4-1/2 bolt pattern, but you will want to confirm this is the same on your trailer by removing the hubs and checking. The # AKIHUB-545-2-1K you were looking at has the 5 on 4-1/2 bolt pattern but uses a slightly different bearing, so it's not going to be a match for you unless you were to find # L44643 bearings when you check.
For a kit with L44649 bearings you can use Dexter Trailer Hub Assembly # 8-258-5UC1. This kit is for 2200-lb axles, 13- to 15-inch wheels and has a 5 on 4-1/2 bolt pattern. It includes the idler hub, bearings, races, seal and grease cap. If these characteristics match your existing hubs then this will work for you.
If you find completely different bearings in your current hub, just let me know what you find and I can help you locate the correct replacement hubs.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Review of CE Smith Trailer Hubs and Drums - Hub - CE13315
- Search Results: spindle nut kit
- Search Results: spindle nut
- Search Results: 1 spindle washer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Determine the Correct Size of Double-Lip Grease Seal for Jet Ski Trailer
- Q&A: How to Find Replacement for TDE 11029C Hub Assembly
- Q&A: What Size Spindle do Bearings L68149 and L44649 fit on
- Q&A: How to Confirm Correct Size of Grease Seal
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Search Results: l44649
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Search Results: l68149
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: lug nut
- Shop: Gooseneck Hitch