How to Determine the Correct Size of Double-Lip Grease Seal for Jet Ski Trailer
Question:
I would like to get some double lip grease seals for my jet ski trailer. My axle size is 11/16. That is the size bearings that I use. Is there any other info that you need to help you get the right part? Thanks
asked by: George
Expert Reply:
In order to get the proper seals for you, I'll need the reference number off the inner bearing and the diameter of the spindle that the inside of the seal rides on. If you can't find the reference number on the bearing, use an accurate measuring device like a digital caliper to measure the inside dimension of the bearing. A ruler or tape measure isn't accurate enough, we'll need the measurement to the second decimal place (hundredth of an inch).
With this information, I'd be happy to look for a replacement grease seal for you.
Product Page this Question was Asked From
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Continue Researching
- Video: Review of CE Smith Trailer Hubs and Drums - Hub - CE13315
- Search Results: spindle nut kit
- Search Results: spindle nut
- Search Results: 1 spindle washer
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: Replacement Hubs for Karavan 2004 Double PWC Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Video: Choosing the Best Trailer Bearing Races Caps and Seals
- Video: Bearing Repacking and Grease Seals Installation
- Search Results: bearing seal kits
- Search Results: bearing seals
- Search Results: seal
- Q&A: Spindle Dimensions of a 3500 lb Axle
- Search Results: l68149
- Q&A: How To Convert Oil Bath Hubs on 3700 Lb Axle Over to Grease
- Q&A: Replacement Trailer Hub Grease Seal with Inner Diameter of 1.6 inches
- Video: Review of Kodiak Disc Brake Caliper Rebuild Kit - KDBC225KIT
- Shop: Brake Controller
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer