Which Hitch Fits 1993 Chevy Silverado with Roll Pan Bumper

Question

Question:

Have a 93 Silverado with a roll pan , theres hitch cut out in license plate area need a hitch to fit roll pan isnt on yet

asked by: Pete

0

Expert Reply:

For your 1993 Chevy Silverado that has a roll pan rear bumper we have the Curt Class III hitch part # 13942 as a confirmed fit that would work great. This does put the hitch opening behind the rear license plate like you mentioned as well. See attached picture.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For a 1994 GMC dually truck with a roll pan the Draw Tite hitch part #41522 is the correct fit and a great option. This has towing capacity of 5,000 lbs.

view full answer...

Answer 2

For your 1990 Chevy truck with a roll pan bumper what you will want is the Draw Tite hitch part #41522 which is a confirmed fit.

view full answer...

Answer 3

I have another option but the Curt Trailer Hitch Receiver #13942 will not fit on your 1992 Chevrolet CK 1500 if you do not have a roll pan. This is due to the fact that the roll pan hitches sit higher up and require a cut out in the roll pan for the…

view full answer...

Answer 4

The closest thing that we have to your description if the Titan Brake Actuator with Manual Lockout #T63FR. This is rated for 7,500 lbs towing/750 lbs tongue weight, is compatible with a 2" hitch ball, comes with a manual reverse lockout, and…

view full answer...

Answer 5

For your 1989 Chevy C/K Series Pickup I recommend the Curt Class III Trailer Hitch #13942. This will fit your truck with the roll pan and the only slight modification you will need to do on the bumper is to cut in the license plate area so the hitch…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Which Hitch Fits 1993 Chevy Silverado with Roll Pan Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching