Will Fulton F008592 Fender Work on Both Driver's and Passenger Side of Trailer

Question

Question:

does this fender work for both left and right

asked by: Mary

0

Expert Reply:

It certainly will. The Fulton # F008592 single axle fender will indeed work on either the driver or passenger side of your trailer. If you need mounting brackets, use # PF1135-BKT-2.

expert reply by: Mike L

0

Answer 1

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…

view full answer...

Answer 2

Fender mounting brackets #CE26098G-2 could work for you. they have a hole spacing of 2-3/8 inches on center. It is possible that a 2-1/2 inch u-bolt could still fit. If not widening one or both holes slightly would be permitted.

view full answer...

Answer 3

The best fit match we have for a 32" long trailer for 12" wheels is the Fulton Single Axle Trailer Fender with Top and Side Steps part #F008582 for black, part #F008592 for silver, or part #F008572 for white. These fenders measure…

view full answer...

Answer 4

Not necessarily. I don't have the ability to look up which fenders your trailer left the factory with, but I might be able to assist you in finding something similar. You'd want to measure your existing fender and see if anything we offer…

view full answer...

Answer 5

I can help you determine if the Fulton fenders you asked about fit your trailer, but fenders are universal parts and there is simply no way to know what fits any specific year, make and model of trailer (this is actually true for all trailer parts…

view full answer...

Answer 6

The CE Smith Single Axle Trailer Fender #CE19502 is the one fender that we have that will fit the brackets that you have. This fender is only available in the gray color. The color is molded into the plastic so if you so choose you can replace both…

view full answer...

Answer 7

For the 13" #CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4 inches between the two inside holes. The holes on the mounting surfaces are spaced apart 5 inches vertically and 2 inches…

view full answer...

Answer 8

All of the replacement trailer fenders we offer are general-purpose products rather than an exact replacement for an OEM part, so you'll want to measure to ensure you have adequate clearance between tire tread and fender to allow for normal…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Will Fulton F008592 Fender Work on Both Driver's and Passenger Side of Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching