Is Buyers Products 2-1/2" Wide Fender Extension Available in 25' Coil

Question

Question:

This looks like what I need,but I only need 25foot for 4 fenders on my 1986 Dodge that already has the holes drilledtruck just got painted and Im looking for new flaresPlease correspond,thanks..

asked by: Brian G

0

Expert Reply:

The Buyers Products 2-1/2" Wide Fender Extension # 337B52150 is only available in a 50' coil so you can either use the other 25' for replacement parts or try to sell it to someone else. I checked with Buyers Products and verified this.

expert reply by: Jon G

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The StabiliTrak that's built into your GMC Sierra does the same thing that the Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV does, so you'd have to disable the built in TSC to use it. Since they're the same…

view full answer...

Answer 4

Those are some good questions, and we'll start with if the brake lights will flash during activation using the Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV. The answer to that is no, they will not flash when the True Course is…

view full answer...

Answer 5

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

I just checked with my contact at Curt. The Curt True Course #C94VV does not have a provision for the user to adjust its sensitivity. The True Course is more for emergency maneuvers, high winds, semi trucks passing and so on. It is not necessarily…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Congrats on the new truck! You won't have to swap our your Curt Q20 Hitch but you will need to use an adapter because GM changed the puck pattern in 2020. The correct adapter is the Item #C88KR you were looking at. This will mount directly to the…

view full answer...

Answer 11

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Is Buyers Products 2-1/2" Wide Fender Extension Available in 25' Coil

Product Page this Question was Asked From

Continue Researching