Correct Wiring Harness Bracket to Install 4-Pole on 2020 Chevy Traverse

Question

Question:

Considering ordering a Curt CU29FR, with a T-One Harness #118761. What is the recommended wiring harness bracket? going onto a 2020 Chevy Traverse LS?

asked by: Bill W

0

Expert Reply:

The Curt Class III hitch, part # CU29FR and the Tekonsha # 118761 are both excellent choices. For the 4 pole, you'll need part # 18144. The mounting hardware is included.

expert reply by: Mike L

0

Answer 1

We have an OEM style of hitch solution for your 2020 Chevy Traverse that is going to cost much less than a dealer option and will be just as strong with the Curt hitch part #CU29FR. This hitch hides behind the access panel of your rear fascia just…

view full answer...

Answer 2

If I'm understanding you correctly, you'd like to switch the 4 way connector on your trailer to a 7 way round connector, which is absolutely possible and is required if you're doing something like adding electric brakes to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

For your 2018 Chevy Traverse I recommend the Tekonsha T-One Vehicle Wiring Harness #118287 if you need a 7-Way connector or the Tekonsha #118761 if you need a 4-Way connector. These are both custom harnesses that will install by simply plugging…

view full answer...

Answer 5

For a 2021 Chevy Traverse we have two trailer hitch receivers, the etrailer Trailer Hitch Receiver #e56YR and the Curt Trailer Hitch Receiver #CU29FR. Both have the same maximum gross trailer weight capacity of 5,000lbs and maximum tongue weight…

view full answer...

Answer 6

For your 2019 Chevy Traverse, the Curt hitch measured 3-1/2 inches from the hitch pin hole to the edge of the bumper; the correct part number is the following: - Curt Trailer Hitch Receiver #CU29FR Also, if you plan on doing any towing with your…

view full answer...

Answer 7

The only significant difference between the Draw-Tite #75528 and the Curt #13424 is the capacity. Since both of these far exceed the towing capacity of your vehicle that really doesn't make a difference. If I were to recommend a hitch for your…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver - Custom Fit part #CU94FR for the 2020 Chevy Traverse does not require drilling. However, it requires temporary removal of bumper/fascia during installation. The exhaust must be temporarily lowered for installation,…

view full answer...

Answer 9

There are two main trailer hitch options for a 2020 Chevrolet Traverse, the Draw-Tite Max-Frame Trailer Hitch Receiver part #76184 (see photo one) and the Curt Trailer Hitch Receiver part #C13380 (see photo two). The main difference between the two…

view full answer...

Answer 10

For your 2020 Chevrolet Traverse with a factory hitch, I recommend the Rapid Hitch Adjustable Aluminum Ball Mount Kit #AM3411 because it offers different height positions allowing up to a 5 inch drop or 6 inch rise. This is recommended for vehicles…

view full answer...

Answer 11

For your 2021 Chevy Traverse the hitch I would recommend for use with a hitch step is the etrailer part #e56YR as it's the best priced, fits behind the trim panel of the vehicle so it can be hidden when not in use, and doesn't have trailer…

view full answer...

Answer 12

The etrailer #e56YR and Curt #CU29FR, are very similar. The capacity and installation process is the same. However, one of these stands apart from the others. If I had to recommend one for your 2023 Traverse it would be the etrailer #e56YR. The…

view full answer...

Correct Wiring Harness Bracket to Install 4-Pole on 2020 Chevy Traverse

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching