T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(97 reviews)
Price: $29.91
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Retail:$128.78
Our Price: $29.91
You Save: 77%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (97)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point under vehicle
- Plug in connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located just beneath your vehicle, on the driver's side.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118761 Tekonsha T-1 T-Connector - 4 Wire
Item # 118761
Installation Details
This Product Fits The Following Vehicles
- 2018 - 2024 Buick Enclave
- 2018 - 2024 Buick Enclave
- 2018 - 2023 Chevrolet Traverse
- 2018 - 2023 Chevrolet Traverse
- 2024 - 2024 Chevrolet Traverse Limited
- 2024 - 2024 Chevrolet Traverse Limited
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118761
Average Customer Rating: 4.8 out of 5 stars (97 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Jeff 03/20/2024
Easy to install, the videos on hitch and also electrical wire harness were helpful! I called customer service with a question and she told me what video to watch and minutes and seconds in the video where it shows how to solve my problem
by: John 03/04/2024
Chevrolet Traverse
Just had my e-trailer hitch install everything went very well. I really like the fact that the hitch is hidden behind the bumper of my Traverse. Good product good price and good service.
by: Irene02/27/2024
A fantastic company to deal with. Awesome prices. Our shipment was opened and pieces missing, one call and the parts were on their way! I recommend them to everyone
by: Kenneth03/13/2019
Saturn Sky
This hitch was very easy to install and it fit perfectly. It took about 1 hour and 45 minutes to complete. The video instructions were very clear. They were right on the money with their time estimate, had I planned ahead I could have gotten it done quicker.
Tow packages aren't standard on SUV's anymore and prices are sky high to have hitches installed by "professionals". These hitches are so easy to install that nearly anyone will get professional results and save a lot of money.
In addition to saving money and the satisfaction of doing this myself, I like the fact that I can hide the hitch if I want to.
by: Kevin08/28/2020
The rep Ashley was great got me my wiring harness to me quickly made sure I got the right product
by: Marco Silva 04/10/2019
2019 Chevrolet Traverse
Awesome product takes some time to install but after that you don’t realize that there is a hitch behind the bumper
by: Claude 08/09/2022
Buick Enclave
This wiring for my Enclave worked perfe ctly.
by: ST03/17/2023
2023 Chevrolet Traverse
Placed order and it was at my door 2 days later. Faster delivery than the giant online e-commerce company. I mainly decided to buy from etrailer because they take the time to provide great easy to follow installation videos that made installing simple.
by: Billy L.07/01/2020
Easy installation and worked perfectly. I didn't get to use much since I traded vehicles. I didn't remember to take a photo. I was completely satisfied with the Curt trailer hitch and the wiring so I ordered a Curt trailer hitch and wiring for my new Cadillac XT5 from etrailer.
Billy L.
7/5/2021
The hitch and wiring work fine, no problems. Well satisfied.
by: Roland08/06/2022
Chevrolet Traverse
This mounting bracket was the way to go when installing our Draw-Tite trailer hitch and T-One Wiring Harness on our 2020 Traverse. Bolted right on to the provided mounting plate on the hitch. Out of the way, yet easy access.
by: Todd04/29/2022
2021 Chevrolet Traverse
I think the way the hitch was packed was extremely poor. You put a steel hitch with no packing material whatsoever in an oversized cardboard box and then threw in the box with the hitch Mount and the plug and Play. The bow was smashed open at both ends. Also I only ordered one plug and Play wiring and one mount for that but I received two each?
Brooke M.
5/3/2022
Thank you for reaching out. I have sent your information along to our customer service team.
by: Mike05/17/2022
Box was destroyed. Product fell out as I picked it up to bring it indoors. Items were missing. This is the second shipment from etrailer.com that has arrived this way in the past week. I am attempting to contact customer service but I get disconnected after a hold period. Very disappointed.
Brooke M.
5/17/2022
Thank you for reaching back out. I have sent your information along to our customer service team and they will be reaching out to you in the near future.
Brooke M.
5/25/2022
Thanks for letting us know. I have sent your information along to our customer service team.
by: Thomas08/16/2023
Perfect fit
by: Joseph05/26/2022
All is good. I would like to buy an affordable electric bike bike rack.
Brooke M.
5/30/2022
Glad to hear the wiring is working well for you. As far as electric bike racks go, part # S64678 may be a good place to start. It is rated to be used on the back of motor homes as well. It can hold two sixty pound e bikes with tires up to five inches wide. This rack works on one and one quarter inch to two inch hitches. At this time it is the most economical option, but sometimes prices can fluctuate so just be aware of that.
by: Phil T10/06/2018
2018 Chevrolet Traverse
Great product at a great price. The wiring harness(118761) just plugs into the factory plug on our 2018 Traverse ,very easy install if done at the same time of hitch installation when the rear bumper cover is off the vehicle. Works fine.
by: RMD08/12/2021
2019 Chevrolet Traverse
Great fit, all the components and hardware required for the hitch installation were included, even the fishing wire for the bolts. Highly Recommend using these guys. Would recommend buying the wire harness with the hitch and installing before placing the back panels back on.
by: Ian G04/07/2021
I bought this along with the hitch for my Traverse. It was easy, just plug it and secure the wires. If I need to install another hitch to another vehicle, I will look for the same thing.
by: Keith05/30/2020
2019 Buick Enclave
The Curt hitch did nit fit exacrly, it was bent. Probably dropped during transport. Followed etrailer recommendations to correct, worked great. No issue with the wiring harness. I have yet to receive the wiring test device
by: Bob I05/05/2021
Works great no issues with this item. Makes connecting trailer stop and taillights simple.
by: Terry 02/22/2023
Plugged riright in on my 2023 traverse! Great product
by: Wes 09/04/2020
Delivered quickly. Great price. Easy to install at same time as hitch. Worked perfectly.
Wes
9/5/2021
Havent used it yet. Its a COVID thing.
by: Roy05/30/2019
We are very pleased with our new trailer hitch. The installation was no trouble at all. I would definitely recommend this company and product!!
by: Carson 07/22/2020
2019 Chevrolet Traverse
Great product...easy installation follow my installation of the Draw-tie Hitch.
Worked great when hauling my bikes for a MotoX trip with my son
by: Kenton07/21/2021
Shipped my items faster than [online store] could ever process such a large item. Also informed me a wire harness I ordered was on back order and switched it for me personally. Great company.
by: David12/19/2018
2019 Chevrolet Traverse
A friend and I today put on the hitch and the wire harness. It took us a few hours for a couple guys that are 63 years old.
25
97
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended Trailer Wiring for a 2023 Chevrolet TraverseYes, for your 2023 Chevrolet Traverse we have the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118761. This harness is made of 16 AWG wire, comes with a dust cover to protect the connector when not in use, and connects easily without splicing.
view full answer... - Recommended Trailer Wiring Harness for 2020 Buick Enclave We sure do! For your 2020 Buick Enclave the Tekonsha T-One Vehicle Wiring Harness # 118761 will work perfectly. This custom harness is going to plug right into a factory port that's located beneath the vehicle on the driver's side. This is a completely plug-and-play install and it will provide you with a 4-Way connector to power your trailer's signal lights. I have attached an installation video that you can also follow along with.
view full answer... - Recommended 4-Way Trailer Wiring Harness for 2018 Buick Enclave For your 2018 Buick Enclave I recommend the Tekonsha T-One Vehicle Wiring Harness # 118761 because of Tekonsha's reputation for producing extremely reliable and long-lasting products. I can tell you that we receive far fewer troubleshooting questions regarding their harnesses than we do with those from any other manufacturer. This custom harness will install by simply plugging into a factory port beneath the Enclave on the driver's side (see attached photo). It will provide you with a...
view full answer... - Trailer Wiring Recommendation for 2020 Buick EnclaveWe have two really great and easy to install trailer wiring options for your 2020 Buick Enclave. We have the 7-way part # 118287 and the 4-way part # 118761 which plug right into the trailer wiring port at the rear of your vehicle. If you plan to tow a smaller trailer without brakes you'd want the 4-way but if you plan to tow a trailer that has brakes like maybe a slightly larger camper you'd want to go with the 7-way option.
view full answer... - Recommended Trailer Wiring Harness for 2018 Chevy Traverse For your 2018 Chevy Traverse I recommend the Tekonsha T-One Vehicle Wiring Harness # 118287 if you need a 7-Way connector or the Tekonsha # 118761 if you need a 4-Way connector. These are both custom harnesses that will install by simply plugging into a factory port beneath the vehicle on the driver's side (see attached image). I recommend these over the Curt options that are also available for your Traverse because of Tekonsha's reputation for producing extremely reliable products. We...
view full answer...
- How to Pick Out Trailer Wiring for 2018 Chevy TraverseWe have two options for trailer wiring for your 2018 Chevy Traverse. We have the 7-way kit part # 118287 and the 4-way part # 118761. Basically it comes down to what type of connector your trailer has for you to know which you'd need. If your trailer has a round plug for trailer wiring you'd want the part # 118287 or if instead it has a flat connector with 4 wires ran to it you'd want the 4-way part # 118761.
view full answer... - Bumper Clearance on 2019 Chevy Traverse For Curt Trailer HitchFor your 2019 Chevy Traverse, the Curt hitch measured 3-1/2 inches from the hitch pin hole to the edge of the bumper; the correct part number is the following: - Curt Trailer Hitch Receiver # CU29FR Also, if you plan on doing any towing with your Traverse, teh wiring harness you need is the T-One Vehicle Wiring Harness # 118761.
view full answer... - Recommended 4-Pole Trailer Wiring Harness for 2020 Buick EnclaveWe sure do! You'll want to use # 118761. You'll also need a bracket mount # 18140 if your hitch doesn't have a bracket mounting tab. You'll also need the bracket for the plug, part # 18144. I wouldn't recommend the # 18252 you'd looked at, you'll want to use the vehicle's tow package connection so you won't have to do any cutting or splicing.
view full answer... - Hidden Trailer Hitch and Wiring Recommendation for 2023 Buick EnclaveFor your 2023 Buick Enclave the etrailer hitch part # e56YR is your best hidden hitch option. Once installed it sits behind the rear bumper fascia panel which means that when not in use it would be totally hidden. It also has a matte finish instead of gloss which helps it blend in a little bit and has the best price too. For trailer wiring as well you'd want the Tekonsha kit part # 118761 and you'd be set. This is the easiest to install and is also a very reliable setup.
view full answer... - Best Trailer Hitch Receiver for 2020 Buick EnclaveThe best trailer hitch receiver for your 2020 Buick Enclave is the Curt Trailer Hitch Receiver # CU29FR because it has a concealed crosstube and is a bolt-on installation that will not require drilling into your vehicle's frame to install. This Class III, 2" trailer hitch is entirely hidden behind your bumper when not in use. This hitch is rated for use with a weight distribution system, which is important for those that use a WDS to stay level or control sway. I have added a link to...
view full answer...
- Hidden Trailer Hitch Recommendation for 2023 Chevy TraverseFor your 2023 Chevy Traverse the most hidden hitch I would recommend is the etrailer # e56YR which fits behind the rear bumper panel when not in use which allows it to be totally hidden. It also has a matte finish which makes it stand out a little less and has best price. If you need trailer wiring too you'd want the Tekonsha part # 118761 which installs very easily.
view full answer... - Correct Wiring Harness Bracket to Install 4-Pole on 2020 Chevy TraverseThe Curt Class III hitch, part # CU29FR and the Tekonsha # 118761 are both excellent choices. For the 4 pole, you'll need part # 18144. The mounting hardware is included.
view full answer... - Recommended Hitch for a 2022 Chevrolet TraverseThe hitch that I recommend for your 2022 Chevrolet Traverse is the etrailer Trailer Hitch Receiver # e56YR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also features a nice matte black finish. If you plan to do any towing you can pick up the T-One Vehicle Wiring Harness # 118761 and the etrailer Ball...
view full answer... - Will Curt Trailer Hitch Receiver Fit 2023 Buick EnclaveThe Curt Trailer Hitch Receiver # CU29FR is confirmed to fit your 2023 Buick Enclave. Yes, the hitch will replace the existing bumper beam on your vehicle. Once installed, it will be completely hidden when your removeable hitch panel is in place. This features a bolt-on installation and comes with a lifetime warranty. If you plan on towing, you will also need the # 118761 for wiring. This has a simple, plug-in installation and will allow you to power a trailer's signal lights. For a ball...
view full answer... - Best Hitch for a 2022 Chevrolet TraverseThe hitch that I recommend for your 2022 Chevrolet Traverse is the Curt Trailer Hitch Receiver # CU29FR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you are needing to tow a trailer once you have the hitch installed you can round off a tow package by picking up the T-One Vehicle Wiring Harness # 118761...
view full answer... - Is Curt Hitch # CU29FR A Good Fit For a 2020 Chevy TraverseThe Curt Trailer Hitch Receiver part # CU29FR is a great fit for the 2020 Chevy Traverse all models because it provides the best ground clearance but is also the least visible option so it's not an eyesore like some aftermarket hitches. The only portion of the hitch that is visible once installed is the receiver tube and not the bulky cross tube. The Curt will provide about 18.5 inches of ground clearance which is a lot more than the standard ground clearance most hitches provide. Better...
view full answer...
- Recommended Trailer Brake Controller For A 2022 Chevy Traverse For your 2022 Chevy Traverse I recommend the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195. This proportional brake controller is our most popular selling model and is transferable between automobiles. It automatically levels when mounted within a 360-degree vertical range. It includes a customizable LCD display, storable settings, 3 boost levels, battery protection and continuous diagnostics. To install this trailer brake controller you'll also need...
view full answer... - Best Hitch for a 2021 Chevrolet TraverseThe hitch that I recommend for your 2021 Chevrolet Traverse is the Curt Trailer Hitch Receiver # CU29FR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you are needing this hitch to tow, you can round out a tow package by picking up the T-One Vehicle Wiring Harness # 118761 to provide a 4-way connector...
view full answer... - Will etrailer Trailer Hitch Receiver Fit 2023 Buick EnclaveYes, the etrailer Trailer Hitch Receiver # e56YR fits your 2023 Buick Enclave. If I had to choose between this hitch and others like it, I would go with the etrailer hitch. What sets it apart is the matte black powder coat finish. This gives the hitch more of an OEM look. It also does a better job hiding dirt and scratches compared to the glossy finish you find on the others. If you plan on doing some towing, you will also need the Tekonsha T-One Vehicle Wiring Harness # 118761. This has...
view full answer... - Recommended Hitch for a 2022 Chevrolet TraverseYes, the hitch that I recommend for your 2022 Chevrolet Traverse is the Curt Trailer Hitch Receiver # CU29FR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. To round out a towing package for your Traverse you can pick up the T-One Vehicle Wiring Harness # 118761 and the etrailer Ball Mount Kit # 989900.
view full answer... - Trailer Hitch and Wiring Recommendation for 2018 Buick EnclaveThe first thing you'll want is a trailer hitch for your 2018 Buick Enclave. For that I recommend the Curt part # CU29FR because it has a two-inch hitch opening which means it has plenty of towing capacity and because it installs behind the rear bumper cover which makes it totally out of sight when not in use. I attached an install video for this hitch for you to check out as well. For a 4-way trailer connector you'd then want the part # 118761 which installs without splicing by plugging...
view full answer...
- Recommended Trailer Hitch For 2020 Chevrolet TraverseFor your 2020 Chevrolet Traverse I recommend the Curt Trailer Hitch Receiver # CU29FR. I really like the design of this hitch. There's a trap door on the bottom of the bumper where the receiver tube will sit, and it can be put back when the hitch is not in use. So, there won't be anything sticking out, or changing the way your Traverse looks. It also helps with ground clearance, because the hitch will sit higher than the lowest part of your bumper. This option will give you the best look. To...
view full answer...
- Recommended Hitch and Wiring for 2024 Buick EnclaveWe have exactly what you need to get your 2024 Buick Enclave set up for towing. Starting with a hitch I recommend the etrailer # e56YR. This custom-fit class 3 hitch has a 2" receiver and a 5,000 lb towing capacity. It also features a matte black powder coat finish for an OEM look that also helps hide dirt and scratches. For wiring, the most reliable option is the Tekonsha T-One Vehicle Wiring Harness # 118761. This plugs into the connection point in your rear cargo area. Once installed,...
view full answer... - Trailer Hitch Recommendation for 2018 Buick EnclaveYes, the Curt hitch part # CU29FR is a confirmed fit for your 2018 Buick Enclave and would be a great option for you. For trailer wiring you would want the part # 118761 which is a custom fit wiring kit. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Jonathan Y
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
John A
Video by:
John S
Video by:
Thomas T
Video by:
Ethan H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Claude
8/10/2023
It is working perfectly.