How To Use Jeep Wheels/Tires On Off-Road Trailer

Question

Question:

Hello, I am in the process of converting a 7x12 cargo trailer for to use as a small camper. My question is specifically about lifting/converting the trailer to run 33inch tires off of a 2020 Jeep Rubicon. I believe the wheels have 5 inches of backspace and are 5 on 5 bolt pattern. The trailer currently has a 3500# Dexter axle on it. Can you point me to the right ion of product to successfully mount these tires/wheels onto this haulmark cargo trailer?

asked by: Shon B

0

Expert Reply:

I do have an option but in order to run larger off-road tires you won't be able to use a straight axle most likely due to the needed backspacing of the wheel. Therefore, the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR2KHDS03 is what you need. This system has a 2,000 lb weight capacity but that's the only option to get the needed 5 on 5" bolt pattern. I have attached the options for this below.

Trailer Idler Hub Assembly part # AKIHUB-550-35-EZ-K
or
Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K and Electric Trailer Brake Kit part # AKEBRK-35-SA

expert reply by: Conner L

0

Answer 1

The Timbren Axle-Less system is compatible with hubs that have 5 on 4-1/2 inch bolt patterns. For just an idler hub you would want the part #84545UC1-EZ or for a brake hub you would want the part #84546UC3-EZ.

view full answer...

Answer 2

From the research I did the 2015 Jeep Wrangler with 17-18 inch wheels would have a 5 on 5 inch bolt pattern. For a 2k rated Timbren Axle Less system that has a 4 inch lift built into it and is setup for wider tires we have the part #ASR2KHDS03 and…

view full answer...

Answer 3

The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs #ASR2KHDS03 is a great choice and the idler hubs you would want to fit are the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on…

view full answer...

Answer 4

I'll need more info from you like what capacity you'd need and do you want the lifted version of the Timbren but what you are doing is possible. For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit…

view full answer...

Answer 5

For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part #ASR2KHDS03 which is great for applications like yours you would want the Trailer Hub part #84550BX that you mentioned as well. This hub includes the…

view full answer...

Answer 6

I attached a diagram that has all of the relevant dimensions of the #ASR2KHDS03 that you referenced. From the hub face to the trailer frame this setup will give you 8-1/2 inches of clearance for your trailer wheels and tires. (see dimension K on…

view full answer...

Answer 7

The deflection, or suspension travel, of the Timbren Heavy-Duty Axle-Less Suspension, #ASR2KHDS03, is 1-5/8 inches.

view full answer...

Answer 8

I have a solution for you, and it sounds like you're looking for a Timbren system that can be used with 5 on 5 hubs that would allow you to use Jeep wheels. Unfortunately the Timbren #ASR1200S03 spindle does not have any hubs with that bolt…

view full answer...

Answer 9

An off-road tire won't necessarily be wider than a standard tire but generally will have more knobby tread design. A 215 tire will be about 8-1/2 inches wide. If the wheel used has a zero offset then from the hub face to the inside sidewall of…

view full answer...

Answer 10

I have another option for you, but at this time we do not offer a hub with the 5 on 5" bolt pattern that is rated for 17" wheels. For example the Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased #84550BX you were looking…

view full answer...

Answer 11

I actually do not recommend using the steel rims from your Jeep Wrangler on your tandem axle trailer. There are quite a few differences between passenger and trailer wheels. This includes the amount of weight they are designed to support, their…

view full answer...

Answer 12

For your application I would go with the Timbren part #ASR2KHDS03. This kit provides a 4 inch lift and is set up for wider, off-road tires, plus it has a 2,000 lb axle capacity which would match your trailer's needs.

view full answer...