2k Rated Axle System for Off Road Trailer and Hubs with 5 on 5 inch Bolt Pattern
Question:
I have a 2015 Jeep Wrangler that I am building a trailer for...The bolt pattern looks to be 5 on 2.930inch . Close to the 5 on 5 measurement but not quite. Do you offer a hub for this application? I will need a torsion axle, 48inch mount spacing, 64inch between the hub faces. With a 45 degree . 2000lb rate. I would like to buy the whole assembly. No trailer brakes. Thank you.
asked by: Mark G
Expert Reply:
From the research I did the 2015 Jeep Wrangler with 17-18 inch wheels would have a 5 on 5 inch bolt pattern.
For a 2k rated Timbren Axle Less system that has a 4 inch lift built into it and is setup for wider tires we have the part # ASR2KHDS03 and then for an idler hub that will fit the spindle that has the correct bolt pattern you would want the part # AKIHUB-550-35-K.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: 84546uc3~ez
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Q&A: What is the Suspension Travel for the Timbren Heavy-Duty Axle-Less Suspension # ASR2KHDS03
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Q&A: Can an 8-1/2 inch Wide Tire Fit Timbren Axle-Less System ASR2KHDS04 and Clear the Trailer Frame
- Q&A: Trailer Axle Solution for Military Trailer with Jeep Wrangler Bolt Pattern
- Q&A: Is There a 5 on 4-1/2 inch Bolt Pattern Hub Available for Timbren Axle-Less ASR2KHDS03
- Q&A: Would Timbren Axle Less System for Wide Tires Allow for Wider Tires, How Much Clearance is Provided
- Q&A: Recommended Idler Hubs for Timbren Axle-Less Suspension System and 5 on 4-1/2 Inch Bolt Pattern
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: brakes
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: 14125a
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Grease Seals 10-36 (pair)
- Search Results: idler hub
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Fifth Wheel Hitch
- Search Results: leaf spring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Suspension Enhancement
- Search Results: safety chains
- Shop: Gooseneck Hitch