Plug-In Harness Needed To Install Redarc Tow-Pro Elite Brake Controller on a 2019 Nissan Frontier

Question

Question:

What harness in needed for this to fit 2019 Nissan Frontier SV so can just plug it in to harness with out splicing wire if I can? Thanks

asked by: Scott

0

Expert Reply:

In order to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on a 2019 Nissan Frontier you can use the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers part # RED39FR for plug-in-play installation.

expert reply by: Conner L

0

Answer 1

If you only need a left hand brake, we definitely have what you need. The Dexter Electric Trailer Brake Assembly #23-26 will be just the left side (driver side) brake that will come with the #23-26-27 Dexter 10 inch 3,500 pound brake kit. This will…

view full answer...

Answer 2

To install the Redarc Tow-Pro Liberty Trailer Brake Controller #RED24FR you were looking at all you will need is the Plug-In Adapter #RED39FR. This will plug into the controller of the #RED24FR and then plug directly into the factory trailer brake…

view full answer...

Answer 3

For your 2020 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Trailer Brake Controller #RED24FR due to it having such a low profile install due to only the knob being visible that it looks like a factory option, and it is a proportional…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 6

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Answer 7

The #RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the #331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same…

view full answer...

Answer 8

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Answer 9

I recommend going with the Redarc Tow-Pro Elite #RED44FR for towing with your 2022 Toyota Tacoma for a few reasons; not only does it have a totally customized install when you pick up the Adapter #RED99FR and Mounting Panel #331-TPSI-002, but it also…

view full answer...

Answer 10

Based on my research the issue with installing a factory brake controller on your Silverado (post-factory) has to do with the factory harness and programming on the truck. Chevy's official stance is that it cannot be added after the fact. You…

view full answer...

Plug-In Harness Needed To Install Redarc Tow-Pro Elite Brake Controller on a 2019 Nissan Frontier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching