Replacement Happy Jack Front Camper Tie Downs For a 2012 Dodge Ram 3500 Dually

Question

Question:

what part will be for the replacement front camper tie downs for a 2012 dodge ram 3500 8foot dually truck?

asked by: Scott

0

Expert Reply:

If you are just looking to replace just the front camper tie down anchor plates on your 2012 Dodge Ram 3500 Dually with the 8' bed, step or board and factory hitch you need Replacement Front Anchor Plates for HappiJac Custom Truck Bed Camper Tie-Down System - Qty 2 Item # LC182872

If you are looking to replace the complete front tie down you need HappiJac Custom Tie-Downs for Truck Bed Camper Item # LC236326-205221

expert reply by: Shane H

0

Answer 1

The front replacement anchor plates for you 1997 Dodge Ram 2500 or 3500 Dually are the Replacement Front Anchor Plates for HappiJac Truck-Mounted Camper Tie-Downs part #LC182876

view full answer...

Answer 2

HappiJac does offer a tie down set that fits your 2008 Dodge Ram 2500 Mega Cab with the part numbers #LC205220-205221 but the #LC182908 does not fit your truck.

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 5

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Replacement Happy Jack Front Camper Tie Downs For a 2012 Dodge Ram 3500 Dually

Product Page this Question was Asked From

Continue Researching