Will a Linus Dutchi Fit on the Thule Passage 3 Trunk Mount Bike Rack

Question

Question:

My wife has a Linus Dutchi. Will it attach to this rack, just at a weird angle? .

asked by: Philip

0

Expert Reply:

Because of the alternative frame design on the Linus Dutchi you would need to use an adapter bar, # TH982XT, to mount the bike to the Thule Passage bike rack # TH911XT. Another option for the alternative frame is the Hollywood Racks Gordo, # HRG2. It has wider arms so you can place the bike on the rack in different locations on the frame. But, this is only a 2 bike rack.

I have included some instruction links and a video of the adapter bar for you.

expert reply by: Michael H

0

Answer 1

You are absolutely right that the factory hitches on some Subarus are not compatible with Thule racks. In order for the Thule T2 Pro XTR #TH83JV to fit your factory 2" hitch on your 2022 Subaru Outback, the center of the hitch's…

view full answer...

Answer 2

The Thule T2 Pro XTR 2 Bike Platform Rack - 2" Hitches #TH83JV is designed to hold the bikes by the wheels. It is not recommended to use on bikes with fenders. For that application I recommend the Hollywood Racks Sport Rider SE #HLY84FR.…

view full answer...

Answer 3

There are a couple differences between the Hollywood Racks Sport Rider SE Bike Rack item #HLY84FR and the Sport Rider SE2 item #HR1450Z. The main difference is capacity and also tire width of the cradles. The Sport Rider SE item #HLY84FR has an 80…

view full answer...

Answer 4

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 5

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 11

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Answer 12

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...