Why Does Trailer Wiring for a 2011 Ford E-350 Van Require a Converter and Power Wire
Question:
What is the purpose for the power module on the tow ready part # 118551 ? I have a 2011 ford e 350 with out the factory towing package. On my older vans we just wired the trailer wires to the back of the tailights.
asked by: Mike
Expert Reply:
Vehicle tail light wiring has changed quite a bit over the past few years. There are basically 2 wire systems and 3 wire systems. A 2 wire system has combined brake lights and turn signals. A 3 wire system has separate turn signals and brake lights. Three wire systems require a converter to change the signal over to a 2 wire system which is what a trailer uses.
Also, on some vehicles it has been determined that the electrical system cannot or should not handle the load from its own tail lights and the trailer lights as well so they need a powered converter. These converters get power for the trailer lights primarily from the vehicle battery. This protects the vehicle electronics.
There are even more complicated systems that use various pulses on one wire for all functions and others that use various constant voltage on 1 or 2 wires for all the functions. More and more vehicles require a converter these days.
T-connectors like # 118551 for the Ford Van are fairly easy to install. I have linked the instructions for you and a video showing a typical installation.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 7~pole adapters
- Video: Trailer Wiring Harness Adapter Installation - 2011 Ford E-350 Van
- Video: Trailer Wiring Harness Installation - 2014 Ford Van
- Shop: Roof Rack
- Shop: Trailer Wiring
- Shop: Fifth Wheel Hitch
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Adapter 4-Pole to 7-Pole and 4-Pole
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Search Results: brake controller
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer brake controller
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)