Axle Replacement for 6,000 lb Axle with 78.25 Inch Spring Seats
Question:
I have a 2007 Weekend Warrior FS2600. A bearing went out and it gouged up the spindle pretty bad. I smoothed it out with a grinder and it got me home but there is a little play between the inner race of the bearing and the spindle. So I think I should probably replace the axle. My GVWR is 11,100 lbs so I believe that means I have 6k axles. However my spring mount center distance is 78.25inch and I dont see that size available. Is that a custom size? Am I measuring or looking into this wrong?
asked by: Jake
Expert Reply:
You are measuring correctly for the spring seats and you definitely want to replace that axle as the spindle is toast. You will also want to measure for the hub face to hub face measurements. If you have 89 inch hub to hub, you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs # 8327830 but you will need to have the spring seat # TRSS300 welded in the correct locations. If you have 95 inch hub face to hub face, you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs # 7461121 and then use the # TRSS300 to weld your 78.25 inch on center spring seats.
Products Referenced in This Question
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Leaf Spring Suspension
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 6,000 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 6,000 lbs
- Shop: Buyers Products 2-1/2" I.D. Bolt-On Forged Lunette Ring
- Shop: Demco Channel Tongue Trailer Coupler - Black - 2-5/16" Ball - 3" Channel - Bolt On - 21K
- Shop: Buyers Products 2-1/2" I.D. 4-Bolt Welded Mount Lunette Ring
- Shop: RV Camera
- Search Results: camera
- Q&A: Is There 3,500 lb Trailer Axle With 89 Inch Hub Face Length & 5 on 5" Hub
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Search Results: pintle hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: leaf spring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: leaf springs
- Article: Most Popular Wheel Bearings
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Fifth Wheel Hitch
- Search Results: safety chains
- Shop: Brake Controller
- Article: Double-Eye Trailer Suspension System Review
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Shop: Gooseneck Hitch