Will the Rhino Rack J-Style Kayak Carriers Fit on Factory Crossbars of 2018 Nissan Rogue

Question

Question:

Can I mount this directly on the factory crossbars that I bought for my 2018 Nissan Rogue, or do I need different crossbars?

asked by: Steve

0

Expert Reply:

Yes, the RhinoRack # S512-S512X will fit on factory crossbars, as well as a number of other styles of crossbars. We've seen these work on a number of other Nissan factory crossbars, so there's nothing to worry about!

expert reply by: Erik B

0

Answer 1

I recommend going with the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X. This can hold 1 or 2 kayaks and will take up much less room than using 2 individual kayak carriers, so you will have more spare room on your roof rack for other…

view full answer...

Answer 2

In order to determine whether Rhino-Rack 2 Kayak Carrier #S512-S512X fits around your factory crossbars on your 2003 Volkswagen Passat wagon, you need to make sure that your crossbars do not exceed 3-1/8" wide x 1-3/16" tall. I recommend…

view full answer...

Answer 3

The Rhino-Rack Crossbar Adapter, part #KC-FK8, is designed to fit the 2 Kayak Carrier, part #S512-S512X, into bars with a C-channel (or T-track). You'd need two sets of these based on how the carrier installs and is for two kayaks.

view full answer...

Answer 4

While you most likely can use your factory crossbars for transporting 2 75 pound kayaks, we do not currently carry an aftermarket crossbar option to replace the factory bars you have mounted. This is because roof rack manufacturers do not test their…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Will the Rhino Rack J-Style Kayak Carriers Fit on Factory Crossbars of 2018 Nissan Rogue

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching