Do Threads of MB Sturgis Sturgi-Stay T-Fitting w/ Hose for POL Valve # 103609-MBS Require Teflon

Question

Question:

Is it necessary to use teflon tape on the Ton board tank valve and the on board regulator T..and also the fill hoseT?

asked by: Brian C

0

Expert Reply:

The fittings of the MB Sturgis Sturgi-Stay T-Fitting w/ Hose for POL Valve # 103609-MBS do not require any teflon tape when installing. They have rubber gaskets built into them to provide the seal.

expert reply by: Jameson C

0

Answer 1

For your RV propane system to be filled by an external tank I recommend the MB Sturgis Sturgi-Stay T-Fitting w/ Hose for POL Valve - 1/4" FIF and Disposable Cylinder Port #103609-MBS. This T-fitting will connect to your RV tank prior to any…

view full answer...

Answer 2

Thanks for reaching out! While we don't carry that specific brand, there are some common operations between dual two-stage regulators so I'll be able to shed some light onto the subject for you. When using a two-propane tank setup you'll…

view full answer...

Answer 3

The MB Sturgis 2-Stage Propane Regulator part #108221 for horizontal mount or part #108220 for vertical mount is what I recommend for a 100 lb tank. It does not matter which you choose so long as you have the vent pointed downward. These regulators…

view full answer...

Answer 4

Thanks for reaching out! The tank sensors we have that you can use for your 100 lb propane tanks are the GasStop #GS84FR and the Truma LevelCheck #TR77VR. The GasStop installs inline with your tank hoses so you'll need 4 of them while the Truma…

view full answer...

Answer 5

To connect your 100-lb propane tank to your generator, you'll need an adapter like #204051-MBS. Then you'll just need a hose to go from your tank to the generator. A lot of generators utilize the quick disconnect connector, if that's the…

view full answer...

Answer 6

What you need is a T-Fitting and auxiliary hose like what comes in the Kit #103538-MBS, but your propane setup is a bit different than a normal RV so you'll need to get creative in how you're able to connect the T-Fitting. One end is a male…

view full answer...

Answer 7

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...