What is the Maximum Air Pressure for Air Lift 1,000 Pound Capacity Air Helper Springs

Question

Question:

what is the maximum air pressure you could put on the air lift 1,000

asked by: Harry B

0

Expert Reply:

According to the instructions which I have linked for you for Air Lift suspension enhancement # AL60769, the maximum air pressure is 35 psi and the minimum is 5 psi. Over-inflation and under-inflation can damage the air bags so you will always want to stay within the 5 to 35 psi range.

expert reply by: Michael H

0

Tim W.

4/20/2013

Thats very confusing because later in the manual they say, For motorhomes, start with 50-100 PSI in the rear because it can be safely assumedthat it is heavily loaded.

Reply

Patrick B.

4/25/2013

Per Airlifts site, these bags are fully adjustable 5-35 PSI for most applications, and up to 50 or 90 PSI for some motorhome applications. I certainly see the confusion in the instructions. My guess is that they have different pressure listings because the suspension on a motorhome chassis than on the pickup.

Reply

Answer 1

You are correct that the instructions for AirLift 1000 Air Helper Springs #AL60769 indicate to inflate the bags to 35-psi to test for leaks. You are also correct that this is the rated maximum pressure for your specific application in a 2001…

view full answer...

Answer 2

No, the minimum air pressure is 5 psi and the maximum is 100 psi. The 40 figure comes into play based off of the instructions which state that generally the system can support 40 pounds per 1 psi of air pressure. I have linked the installation…

view full answer...

Answer 3

You would want to hitch your trailer up to your tow vehicle and then inflate the bags of the Air Lift Kit part #AL60769 to the point where the vehicle is leveled. So to long story short...inflate the bags after hitching up.

view full answer...

Answer 4

I do have a solution, but your typical air bags and jounce-style springs for your lowered 2015 Ram 1500 will not work. I recommend using the Air Lift 1000 Universal Air Spring Kit - Rear like the #AL60917. In order to find the correct fit you will…

view full answer...

Answer 5

If your 2005 Chevy Tahoe did not come with a factory installed 7-Way trailer connector then you will need to add one using #30955 which plugs into a connector located above the spare tire under the vehicle. I have included a picture that shows what…

view full answer...

Answer 6

Let's begin with the basics. In order for a weight distribution system to work correctly, the existing vehicle suspension needs to be in good condition. Then, you'll need to ensure you have the correct system for the tongue weight of your…

view full answer...

Answer 7

The Curt Echo Under-Dash Brake Controller #C27JR is an excellent choice for your 2005 Chevy Tahoe. I really like it because you mount it under your dash and then you have a clutter-free brake controller to use! The correct wiring kit to connect this…

view full answer...

Answer 8

2005 Silverado models that came with a factory 7-Way plug, meaning 6 blades running around the edge and a round pin receptacle in the center, would not require additional connections to be made in order for the brake controller to function. If your…

view full answer...

Answer 9

The Air Lift AirLift 1000 Air Helper Springs for Coil Springs part #AL60769 will not raise the vehicle when filled to the lowest air pressure rating of 5 psi or when filled to the max air pressure rating of 100 psi. These coil spring airbags will…

view full answer...

Answer 10

The Trailair Rota-Flex 5th Wheel Pin Box #LC328330 has a 1-year warranty according to the manufacturer. This pin box is designed to replace a Lippert 1621 or 1621HD 5th wheel pin box so you'll want to make sure that's what you have by…

view full answer...

Answer 11

There is no drilling required on your 2017 Toyota Tacoma to install the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLT2303. I have added the installation instructions for you to look at, which include the necessary steps needed for…

view full answer...

Answer 12

For the 2002 Workhorse W22 the correct Roadmaster steering stabilizer with mounting brackets is #RM-RBK13-RSSA. The mounting brackets alone are #RM-RBK13. I have included a link to our FAQ on stability control for heavy duty vehicles.

view full answer...

What is the Maximum Air Pressure for Air Lift 1,000 Pound Capacity Air Helper Springs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching