Parts to Make Yakima Round Bar Compatible with Snugtop Roof Rack Rails

Question

Question:

I have a used snugtop with roof rails. Plus my round bar Yakima rain gutter post. What do I need to make them work?

asked by: Johnny

0

Expert Reply:

If you have raised side rails on your Snugtop, then you will need the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 # Y33TR with round bar adapter # Y03536.

If you have tracks then you will use the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR, adapters # Y03536, and 2 sets of Landing Pad 1 # Y00221.

Lock cores # Y07204 can be added to either option if you don't already have the locks.

expert reply by: Jason S

0

Answer 1

The brackets for the Rhino-Rack RSP Series Roof Rack, #RRRVP27, are going to be the same for the left and right sides but the brackets are different front and back. I have attached a picture showing the two different brackets.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

I checked with Yakima and their 58 inch round bar roof rack part numbers #Y00409, #Y00145, #Y03536, #Y44UV is a fit for your 2023 Chevy Tahoe with he factory rack so this would give you what you are looking for.

view full answer...

Answer 7

To add a roof rack to your 2022 Dodge Durango with no rails, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Black - Qty 2 item #Y39UV BaseClip Fit Kit for…

view full answer...

Answer 8

For your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part #Y00409, #Y28TR, #Y03536, #Y06125, #Y06128. This is a 58 inch bar setup and…

view full answer...

Answer 9

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

view full answer...

Answer 10

The Yakima SweetRoll Kayak Carrier w/ Tie-Downs part #Y04074 fit crossbars up to 3-1/2" wide and 1-11/16" tall so you will not have an issue clamping the SweetRoll system to the Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600 that…

view full answer...

Answer 11

I have the perfect solution for your 2022 Ford Maverick! I recommend using the Flint Hill Goods Aluminum Pickup Truck Ladder Rack #FHG64ZR for your application. This is a standard ladder rack that has a 400 lbs weight capacity but it also made of…

view full answer...