Is it Okay for the Bumper to Touch the Curt Hitch part # C13043
Question:
i have the same common problem that the curt hitch doesnt clear the bumper lip on the bottom section of my 2015 lexus gx I think adding a couple of washer between the hitch receiver and the frame will solve the issue. Is this is a safety concern since the hitch will not sit flush with the frame after ing a couple of washers? do i need to purchase a longer bolt? I am very confused.
asked by: Chris M
Expert Reply:
You should only use the provided hardware to secure your hitch. Using any additional spacers or washers will void the warranty from the manufacturer.
If it is an issue where the bumper cover is resting on the hitch and you are able to install it and properly torque the hardware this is not an issue and is very common on a lot of the hitches that I have installed. This eliminates the need for you to cut the bumper for clearance since it isn't really an issue.
If you do not like it you can certainly cut the bumper around the area in which it makes contact with the hitch so it is not an issue. This will not negatively effect the hitch's performance.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Which Trailer Hitch Receiver for a 2014 Lexus GX 460 is Least Visible
- Q&A: Availability of Class IV Hitch for a 2022 Lexus GX 460
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Q&A: Will Curt Trailer Hitch Fit a 2022 Lexus GX 460
- Q&A: 2022 Lexus GX 460 Highest Capacity Trailer Hitch Recommendation
- Q&A: Recommended Trailer Hitch For A 2022 Lexus GX 460
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Q&A: Most Hidden Trailer Hitch for 2016 Lexus GX 460
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: Determining Trailer Tongue Weight
Chris
6/30/2020
I went for it and just screwed it in and it was fine. pretty tight but not too bad. I was concerned for no reason thanks.