Can Curt Echo Mobile Brake Controller Fit 2018 Subaru Outback with 7-Way

Question

Question:

RE: C51180 Curt Echo Please confirm if the C51180 will work. I have wired in a 7 way connector on my vehicle. Subaru 2018 Outback. The 7 way has DC Power and Negative direct from battery along with brake lights, plus turn signals. Thanks

asked by: David M

0

Expert Reply:

The Curt Echo part # C51180 will fit and work great on your 2018 Subaru Outback Wagon that has a 7-way installed with the 12 volt accessory circuit active.

expert reply by: Jameson C

0

Answer 1

Is it possible the brakes on the camper are self-adjusting and were new? This is a common problem where they aren't fully adjusted so they take a higher brake controller setting but as they tighten with each application they eventually feel more…

view full answer...

Answer 2

You can install a brake controller on your 2020 Subaru Outback, and there is indeed a stop light switch on the vehicle. I have added a photo from a video of a brake controller install we did on a '20 Outback that shows the location of the stop…

view full answer...

Answer 3

Our recommendation is to always go by what the vehicle manufacturer states as this is the safest route we can recommend that also won't void the warranty of the vehicle or endanger you or other motorists. That said, if you have confirmed with…

view full answer...

Answer 4

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…

view full answer...

Answer 5

Good Afternoon Lucas, you are on the right track for the easiest way to install a brake controller on your 2020 Subaru Outback Wagon. The Curt Echo brake controller part #C51180 is unlike any other brake controller on the market at this time…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Can Curt Echo Mobile Brake Controller Fit 2018 Subaru Outback with 7-Way

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching