Happijac FM-GL9 Hardware Screw Size

Question

Question:

What is the size of the 4 each 1” long truss screws that reqires the 3/16” pilot hole???

asked by: RICHARD A

0

Expert Reply:

The Replacement Centering Guide Locks for Happijac Custom Camper Tie-Down System - Qty 2 # LC182892 uses #10 screws.

expert reply by: Jason S

0

Answer 1

The Roadmaster Rear Anti-Sway Bar #RM93VR is a confirmed fit for a 2022 Ford F-350, but if you had a suspension lift instead of just a body lift you will most likely need to also need to get longer end links. For this you would need to call…

view full answer...

Answer 2

We have the perfect Rear Anti-Sway Bar confirmed to fit your 2022 Ford F-350 Super Duty! The Roadmaster Rear Anti-Sway Bar #RM93VR will minimize side-to-side movement and improve the overall stability of your vehicle. The bushings are made out of…

view full answer...

Answer 3

When the TorkLift Camper Packer Camper Stand Kit #TLA7010 is assembled it has a capacity of 6,000 lbs so as long as your camper weighs less than that there's no reason you couldn't stay in it.

view full answer...

Answer 4

Different species and grades of wood have different characteristics for durability and strength. Unless you have a trusted local lumber yard you can rely on for guidance I recommend using the TorkLift Camper Packer Camper Stand Kit with Lumber…

view full answer...

Answer 5

I checked with Happijac and the kit you need for your 2011 Ford F-250 is the part #LC182910-182971 for the tie downs and then for the turnbuckles #LC182897. This is a much better setup than a stake pocket attachment for a camper so I would not…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Happijac FM-GL9 Hardware Screw Size

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching