What is TorkLift Camper Packer Camper Stand Kit # TLA7010 Weight Capacity

Question

Question:

Hello, I saw this kit and I noticed it only states for storage. I wanted to know could it be used for sleeping in as well. When i pull my truck camper off I do like to not have to it all the way to the ground to sleep in it or stay a week at a park. Would this kit with the proper lumber be good for support/ enough to sleep in? Thanks!

asked by: Christopher H

0

Expert Reply:

When the TorkLift Camper Packer Camper Stand Kit # TLA7010 is assembled it has a capacity of 6,000 lbs so as long as your camper weighs less than that there's no reason you couldn't stay in it.

expert reply by: Jameson C

0

Answer 1

Different species and grades of wood have different characteristics for durability and strength. Unless you have a trusted local lumber yard you can rely on for guidance I recommend using the TorkLift Camper Packer Camper Stand Kit with Lumber…

view full answer...

Answer 2

The Camco UltraGuard Slide-In Camper Cover - 18' Long #CAM45770 is designed for use when a stored on the landing gear legs or saw horse style stands like the TorkLift Camper Packer Camper Stand Kit #TLA7010. The cover reaches 108 inches tall…

view full answer...

Answer 3

I did some research and it looks like your Lance 830 measures in at 16'9" in length and 9' in height. With that in mind the Adco SFS AquaShed Truck Camper Cover #290-12264 does not look like a fit but I've found a…

view full answer...

Answer 4

The reason the manufacturers of the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSAB have the plastic bed rail exemption is because depending on the thickness of the plastic bed rail you might not have…

view full answer...

Answer 5

While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs #HSAB there is a 3,000lb capacity for the turnbuckles #TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need…

view full answer...

Answer 6

The Brophy #HSAB and #HSSF are essentially the same thing with the exception that the #HSAB has a small bend in it to make connecting to your turnbuckles easier. If you're still needing turnbuckles you can use part #TDHP.

view full answer...

Answer 7

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

view full answer...

Answer 8

Congratulations on your new truck bed camper! I'm sure you will enjoy it for many years. Sway is a common issue with truck bed campers which can be reduced, but not eliminated. The campers are not particularly aerodynamic and the sway will…

view full answer...

Answer 9

Before purchasing the Brophy Clamp On Camper Tie-Downs #HSAB you'll want to take a few measurements of your bedrails in order to determine if these would be a compatible fit. I've attached a diagram below going over the dimensions of the…

view full answer...

Answer 10

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 11

It is very likely the Brophy Clamp On Camper Tie-Downs - Bed Mount #HSAB will fit your 1999 Dodge Ram 2500 with an 8 foot bed, but because this is a universal fit, there isn't any specific fit information for your truck, though I can help you…

view full answer...

Answer 12

We have exactly what you want. HappiJac has a set of 4 that you can add to your camper. This will allow you to control all 4 of the jacks individually from a remote control. You will choose based on the weight of the camper. The heavier set is the…

view full answer...

What is TorkLift Camper Packer Camper Stand Kit # TLA7010 Weight Capacity

Product Page this Question was Asked From

Continue Researching