Headache Rack Compatible with Soft Tonneau Cover on 2011 Chevy Silverado 1500

Question

Question:

Will this headache rack or any other headache rack still work with a cloth tonneau cover? Its for a 2011 Chevy Silverado 1500 crew cab

asked by: Kevin B

0

Expert Reply:

The Westin HLR Headache Rack - Punch Plate Screen - Black Powder Coated Aluminum # 57-81005 is a fit for your truck but will not work with a tonneau cover. The Westin HDX Headache Rack - Black Powder Coated Steel # 57-8025 can work with certain soft tonneau covers because it mounts to the bed rails and provides some clearance for the front rail of the tonneau cover. The Aries Classic Headache Rack - Semi-Gloss Black Powder Coated Steel # AA111000 is another option that also works with some soft tonneau covers.

expert reply by: Jason S

0

Answer 1

I recommend the Westin HLR Headache Rack #W55RV for your 2023 GMC Sierra 3500 Denali. This rack has the opening for the 3rd brake light and camera. It also is the lest obstructive for your view compared to the B&W #BWPUCP7543WA and Westin…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Headache Rack Compatible with Soft Tonneau Cover on 2011 Chevy Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching