Does Curt Hitch # C13392 Fit 2020 Jeep Wrangler Rubicon with Steel Bumper

Question

Question:

I have the Steel Bumper option on my 2020 Jeep Wranger Rubicon. Will this hitch fit? Ive read that the Steel Bumper will require 4 welded nuts on the hitch. Is there a hitch that will fit the Rubicon Steel Bumper?

asked by: Frost

0

Expert Reply:

I checked with Curt and they list their hitch part # C13392 as a fit for all models of the 2020 Jeep Wrangler including your Rubicon that has the steel bumper. You would not need to weld on additional nuts to the hitch.

expert reply by: Jameson C

0

Answer 1

That is a good question Joel. I will start by saying that these days, the class designation for a trailer hitch does not always tell you the full story. In some cases the line between class 2 and 3 can get pretty blurry with so many different…

view full answer...

Answer 2

For your 2022 Jeep Wrangler, the only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish #e98856 and the Curt Hitch #C13392 is that the Curt hitch comes with a higher-quality gloss outer coating over the base…

view full answer...

Answer 3

The tire width of a 35/1250/17 spare tire is 12-1/2 inches. If you have a hitch receiver that like the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98856 that sits flush with the end of your 2016 Jeep…

view full answer...

Answer 4

Yes, the Curt Trailer Hitch Receiver #C13392 you mention will fit your 2020 Jeep Wrangler. This hitch has a maximum towing capacity of 3,500-lbs, a maximum tongue weight of 350-lbs, and features a simple bolt-on installation. Attached is an…

view full answer...

Answer 5

So what you are seeing on your 2021 Jeep Wrangler is a spacer plate, which is on some models of Wrangler and Wrangler Unlimited, but even with this you will still be able to install the Curt Trailer Hitch Receiver #C13392. What you can do is simply…

view full answer...

Answer 6

We offer two hitch receivers options for your vehicle. The first option is the Curt Class III Receiver Hitch - 2019 Jeep Wrangler, part #C13392. This hitch receiver has a maximum tow weight of 3500lbs and a maximum tongue weight of 350lbs. The…

view full answer...

Answer 7

The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #36424 has been discontinued but was a fit for the standard bumper on a 2018 Jeep Wrangler JL. It will not slip over the bracket you reference so it is not a fit for your…

view full answer...

Answer 8

There is a Curt trailer hitch that fits your 2023 Jeep Wrangler JL, so long as it is not the diesel model. I verified directly with Curt that the correct part number is the following: - Curt Trailer Hitch Receiver #C13392

view full answer...

Answer 9

The Yakima HoldUp #Y02443-2 is an excellent bike rack! Although I don't know off-hand if it is compatible with the spare tire on your 2014 Jeep Wrangler I can give you some distances that you can use to determine fitment on your end. From the…

view full answer...

Answer 10

I spoke with Roadmaster and their tech stated you can take the bumper off and use a dead blow hammer to get the Roadmaster Direct-Connect Base Plate Kit #RM24VR in place on your frame horns.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does Curt Hitch # C13392 Fit 2020 Jeep Wrangler Rubicon with Steel Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching