Ladder Roller for Yakima HD Crossbars

Question

Question:

rhino rack roller rr1500 Will this roller fit my Yakima HD bar

asked by: Jim R

1

Helpful Expert Reply:

We have what you need, but the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars # RR1500 will not fit your Yakima HD bars; it is only a fit for Rhino-Rack HD crossbars.

Instead, the correct roller for your Yakima HD bars is the Ladder Roller for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars # Y01163.

I have added a link to a video review of this roller for you to check out as well.

expert reply by: Kyle S

1

Answer 1

So to answer your first question about what comes with the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks #Y01151-5868, you have it exactly right - it is the uprights and rails, 68 inch crossbars, and adapter kit for your…

view full answer...

Answer 2

If the square bars were the Rhino Rack HD crossbars that have channels that along the top of them yes the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars #RR1500 would work. If they are standard square bars like from Thule it would not work.

view full answer...

Answer 3

I have a couple options for you as Thule says you are not able to modify their Roof Rack Roller #TH99PF to make it fit a shorter length. They do offer their 25-9/16" Roller #TH39PF which is quite a bit smaller or you can possibly use the…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Hi Tyler, When adding in air springs on a lifted vehicle the proper way to determine the correct sized spacer is to first install the upper and lower brackets and then measure the distance between them and subtract the height of the air spring bellow…

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 12

The answer to your question will depend on how you use your truck. Vehicle-based systems like the RoadActive Suspension system or air bags will work just fine with a weight distribution system, but they work best to suspend weight being hauled in the…

view full answer...