Bolt Hole Spacing of EcoHitch 306-X7196

Question

Question:

what are the detail dimensions? Can you provide CAD drawings? Thx

asked by: Perry

0

Expert Reply:

The mounting hole dimensions are 38.06 inches bolt center to bolt center across, and on each mounting flange, the bolt holes are spaced 3 inches apart center to center as shown in the provided photo. None of our hitch vendors provide CAD drawings, as they're considered proprietary information.

expert reply by: Mike L

0

click to enlarge

Answer 1

I don't have any recommended installers, but any trusted mechanic should be able to complete the installation for you without too much difficulty. If you're moderately handy, you might even be able to complete the install yourself, as the…

view full answer...

Answer 2

The EcoHitch Hidden Trailer Hitch Receiver #306-X7196 that fits your 2008 Toyota Prius weighs 30 lbs. This is a superb option for a hitch because this is the only hitch for your Prius which has a 2 inch receiver, and it's tongue weight capacity…

view full answer...

Answer 3

The EcoHitch Hidden Trailer Hitch Receiver #306-X7196 for your 2008 Toyota Prius doesn't use a traditional class rating system like other receivers since it does use a 2" receiver that does not carry the minimum weight capacities that would…

view full answer...

Answer 4

Betweeen the Curt #C11468 and Draw-Tite #24808 for your 2006 Toyota Prius, I recommend the Curt simply because we have found that they tend to have better welds and a thicker powder coat than other options on the market. All of this translates into a…

view full answer...

Answer 5

I do have option for you but this is too much weight for that size hitch on this vehicle. Therefore you can either reduce the weight of the bike to 66 lbs by removing the battery so you can use the Yakima OnRamp Bike Rack for 2 Electric Bikes part…

view full answer...

Answer 6

Of the two hitches for your 2009 Toyota Prius the Curt Trailer Hitch Receiver part #C11468 is a couple of pounds lighter than the EcoHitch Hidden Trailer Hitch Receiver part #306-X7196. It would also be my choice because it will offer a slightly…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Bolt Hole Spacing of EcoHitch 306-X7196

Product Page this Question was Asked From

Continue Researching