Will the RetraxPRO Tonneau Cover for 2019 F-150 5.5 Bed Work With Sliding Cargo Drawer Tray

Question

Question:

Im considering this tonneau cover but I currently have the decked drawer system installed. Would there be enough clearance under the canister to fit?

asked by: Meshal M

0

Expert Reply:

The RetraxPRO XR Hard Tonneau Cover part # RTT-80373 which is a fit for a 2019 Ford F-150 will sit about 11"-12" down inside the truck bed. If the canister will not clear the tray, I recommend the BAK Revolver X4s Hard Tonneau Cover part # BAK39ZR as a very durable alternate.

expert reply by: Conner L

0

Answer 1

The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte #RT80383 will have a measurement of 11-5/8 deep by 13-3/4 inches long by 63 inches wide. I reached out to the manufacturer to confirm these dimensions and created a photo to assist.…

view full answer...

Answer 2

The RetraxPRO XR Hard Tonneau Cover w/ Trax Rails - Retractable - Aluminum - Matte #RTT-80384 has a canister that is 13-3/4 inches wide and sits 11-5/8 inches deep from the top of the bed rail. The RetraxPro and the Pace Edwards Jackrabbit…

view full answer...

Answer 3

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...