Will Bulldog Winch Plate BDW20011 Fit M12000 Winch

Question

Question:

I have an older m12000 warn winch with 125ft cable. The dimensions of the winch are: 24.08 X 8.44 X 10.53 with the standard 10”x4.5” bolt pattern. Will the bulldog 2x2 receiver cradle work with this winch: 20011 Bulldog Hitch Mounted Winch Mounting Plate with Handles - 2 x 2 HitchItem # BDW20011 ? Thank you

asked by: Nick

0

Expert Reply:

Yes the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles # BDW20011 that you referenced fits the bolt pattern you need as well as the dimensions so it would work great for you.

expert reply by: Jameson C

0

Answer 1

Yes, the Superwinch Tiger Shark Series Off-Road Winch #SW1595200 that you referenced and the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles #BDW20011 are compatible with each other. The winch has a 4-Bolt mounting pattern: 10" x…

view full answer...

Answer 2

The Superwinch SX12SR Integrated Off-Road Winch #SW49GR uses the standard 10" x 4-1/2" bolt mounting pattern. I've attached a photo showing these dimensions as well as a review video for you to check out.

view full answer...

Answer 3

If you are a frequent user of a medium to heavy duty winch then yes it is a good idea to carry a separate battery with you. Many times we see the auxiliary battery mounted within the engine compartment if there is space available when you have the…

view full answer...

Answer 4

From what I was able to find, the Warn M12000 winch is 24.37" L. x 8.45" D. x 11" H. I've attached a picture with the dimensions on the Bulldog Winch Hitch Mounted Winch Plate #BDW20011 but since the mounting cradle is only…

view full answer...

Answer 5

We do have larger quick disconnects for like 2 gauge wire like the Spectro Stackable Quick Connect #SWC60015-8. They do make these in larger sizes like this but without knowing exactly what size you have now it's harder to say for sure what would…

view full answer...

Answer 6

We have quite a few different front mounted trailer hitch receiver winch mounting brackets available. Without know the bolt pattern or dimensions of your winch I don't have an exact match but the Bulldog Winch Hitch Mounted Winch Mounting Plate…

view full answer...

Answer 7

I am happy to help you get your truck out of the mud. I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit part #65076 for the front mount hitch which has a 9,000 lbs line pull capacity. Since you are using the winch to pull the…

view full answer...

Answer 8

There really isn't a specific width (or thickness) of a winch mounting plate to use with a 12,000 lb winch. You just want to choose one that has a mounting bolt hole pattern that is compatible with your winch. The Bulldog Winch Hitch Mounted…

view full answer...

Answer 9

Yes, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles part #BDW20011 will work with the Warn Electric Winch M12 as they both use the same industry standard winch mounting hole spacing which is 4-1/2" wide x 10 long.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will Bulldog Winch Plate BDW20011 Fit M12000 Winch

Product Page this Question was Asked From

Continue Researching