Trailer Hitch Compatible with 2019 BMW X3

Question

Question:

The right part is Draw-Tite #76226. Please correct this so others do not have to go through hours of not being able to make this work. CURT only makes the right one for the OLDER BMW X3s, not the current one.

asked by: Patrick L

0

Expert Reply:

For your 2019 BMW X3, the Draw-Tite # 76226 you referenced and the Curt # C13387 are the only options in our fit guide. I confirmed with both manufacturers this fit on your vehicle. The Curt option is confirmed by the manufacturer to fit 2018 to present X3 models.

I'm not sure what hitch you were referring to as not a fit, but any hitch other than these two are not confirmed to fit. I've linked the page to our fitguide for your vehicle to assist.

If you will be towing with this hitch, I also recommend using the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 to give you the 4-way flat trailer connector while protecting your vehicle electric circuits.

expert reply by: Jason S

0

Answer 1

I sure can! I went ahead and included the written instructions of the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #SH62VR you were looking at for your 2019 BMW X3 for you to take a look at.

view full answer...

Answer 2

I wish it was possible but the OEM rivets get damaged when they are removed so installing the Curt #C13387 requires installing the included plastic rivets to reattach the wheel wells. You will need to borrow or buy a plastic rivet gun to reinstall…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Really good questions, and I did some digging into the installation of both the Curt Trailer Hitch Receiver #C13387 and Draw-Tite Trailer Hitch Receiver #76226 that fit your 2018 BMW X3. In regards to why the exhaust hanger nuts need to be removed…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Trailer Hitch Compatible with 2019 BMW X3

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching