Will the Saris Bones 2 Bike Carrier Fit a 2018 Toyota RAV4

Question

Question:

Greetings—Will this bike rack fit a 2018 Toyota RAV4 XLE?

asked by: Judy

0

Expert Reply:

The Saris Bones 2 Bike Carrier part # SA805BL is a fit for a 2018 Toyota RAV4. That said, you will need the Hatch Huggers for Saris Trunk Mount Bike Racks part # SA3035 (2) to replace the side and lower hooks.

expert reply by: Conner L

0

Answer 1

We have 3-bike trunk racks that fit your 2020 Toyota RAV4 like the Yakima Fullback 3 part #Y02633 but the Saris you mentioned is not a fit so I cannot recommend it. The Fullback is one of the nicest trunk mounted racks out there because of how easy…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

For your 2024 Toyota RAV4, the best trailer hitch receiver that will fit is the following: - etrailer Trailer Hitch Receiver #e23ZR The #e23ZR is the best because it has completely concealed crosstube so only the receiver is showing, allowing your…

view full answer...

Answer 10

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

view full answer...

Answer 11

Yes we do, we have plenty to choose from. For your 2024 Toyota RAV4 I recommend checking out the Curt Trailer Hitch Receiver #C13416. This hitch has a 4,000 lb maximum capacity, a 600 maximum tongue weight capacity, and is made in the USA.…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4 Prime, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and…

view full answer...

Will the Saris Bones 2 Bike Carrier Fit a 2018 Toyota RAV4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching