Suspension Enhancement that Fits 2007 Dodge Grand Caravan

Question

Question:

Can you tell me if this will fit our 07 Dodge Grand Caravan?

asked by: Doreen

0

Expert Reply:

We have suspension enhancement kits that fit your 2007 Dodge Grand Caravan like the Timbren part # TDVR05096 but at this time there are no Air Lift kits that fit your vehicle or any air bag style kits that are a fit.

expert reply by: Jameson C

0

Answer 1

In order to install the Timbren rear suspension enhancement system #TDVR05096, the first thing you will need to do is lower the rear control arm. In order to lower the rear control arm to remove the coil spring, remove the inner control arm bolt by…

view full answer...

Answer 2

You are correct that using a hitch adapter like MaxxTow #MT70066 (or any similar adapter) along with your hitch cargo carrier would increase stress on your hitch. Use of such adapters actually reduces the hitch's tongue weight (TW) capacity…

view full answer...

Answer 3

Thank you for your kind remarks about the whole etrailer team! We aim to please! It sounds like you are looking for a rear axle rubber jounce spring upgrade for your 2007 Chrysler Town and Country. We do offer a Timbren kit for your van that fits…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, the Buyers Products front mud flaps part #337B1018LSP are a front set of flaps that fits your 2004 Jeep TJ Wrangler.

view full answer...

Answer 6

Your best bet would be to use a cargo carrier designed for a 1-1/4 inch hitch that has an angled shank to provide the additional ground clearance you're looking for. I'd recommend the Curt #C18110, which is compatible with the Class II hitch…

view full answer...

Answer 7

Curt trailer hitch mount cargo carrier #C18110 measures 6-3/4 inches from the center of the hitch pin hole to the nearest edge of the carrier. And there is a rise in the shank of 3-3/4 inches. If you measures from the center of your hitch pin hole…

view full answer...

Answer 8

We do have everything you need to install a 7-Way on your 2020 Subaru Outback Wagon so you can utilize a brake controller but we need to start off by making sure you have a 4-Way for the basic trailer lighting functions. If you don't already have…

view full answer...

Answer 9

The Trailer Bumper Hitch Receiver, part #E-100, can be used on a pop-up camper with up to a 4 inch square bumper. However, you cannot exceed the limits of your camper bumper. The bumper towing and tongue capacities may be indicated on the bumper…

view full answer...

Answer 10

I do not recommend cutting the bag from your Air Lift 1000 Air Helper Springs for Coil Springs - Rear #AL60818 as you could potentially hurt yourself or damage other components of the air springs or your vehicle. These bags were designed to be able…

view full answer...

Answer 11

To install the Air Lift 1000 Helper Springs, part #AL60809 on your 2012 Toyota FJ Cruiser, it does require you to remove the coil springs on the rear of your vehicle To remove the coil springs on your FJ Cruiser you will raise the rear of the vehicle…

view full answer...

Suspension Enhancement that Fits 2007 Dodge Grand Caravan

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching