etrailer Hitche for 2007 Toyota RAV4

Question

Question:

I need a hitch will the etrailer work? 2007 Rav 4wd V6 Thanks

asked by: Jim

0

Expert Reply:

The etrailer hitch # e98864 has a great capacity and a great price as well. It is rated for 525 lbs tongue weight and 3,500 lbs trailer weight.

expert reply by: Jameson C

0

Answer 1

According to the online owner's manual for your 2017 Toyota RAV4, it is not recommended for vehicle models with the SE grade to have a trailer hitch installed. It states that neither towing or using a hitch for accessories like bike racks or…

view full answer...

Answer 2

The second hitch pin hole on the etrailer hitch part #e98864 that you referenced is not used. One is smaller than the others. The smaller hole it not used.

view full answer...

Answer 3

This is a great question. There are two main reasons people prefer the 2 inch trailer hitch size over the smaller 1-1/4 inch. One being the higher capacities like you mentioned but the other is that since this is the most popular hitch size there are…

view full answer...

Answer 4

The etrailer Trailer Hitch Receiver part #e98864 which is a fit for a 2013 Toyota RAV4 comes with M12-1.25x35mm hex bolts. These will match up with the weld nuts in the frame. If the vehicle is older, the chances of the weld nuts being dirty is high.…

view full answer...

Answer 5

When it comes to the towing capacity for a vehicle the manufacturer is the final authority. You can check the owners manual or directly with a dealer and that's what has to be gone by otherwise the warranty of the vehicle would be voided. We…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For the etrailer hitch part #E98864 that you referenced it's going to block a portion of the liftgate sensor of your 2018 Toyota Hybrid but what you can do is kick your foot to either side of the hitch tube and the liftgate will open like normal.…

view full answer...

Answer 8

For your 2016 Toyota RAV4 Hybrid the etrailer hitch part #e98864 is a confirmed fit and would work well. With the appearance panel you have the choice of removing it all together or trimming it to allow the hitch fit. It really serves no other…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Yes, you can use the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter #C32DR with your 2021 F-350. However, it is possible you will not be able to make a full 90 degree turn since you have the short bed, so that is something…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

I have a solution for you to add a hitch with a hidden cross tube on your 2017 Toyota RAV4, but the Draw-Tite hitch you were looking at is not a confirmed fit on your vehicle. The best solution for a hidden style hitch is the EcoHitch #306-X7219,…

view full answer...

etrailer Hitche for 2007 Toyota RAV4

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching