Can 2021 Ford F-350 Short Bed Use Curt Crosswing

Question

Question:

Is the Curt Crosswing ok to use on 2021 F350SD short 6.75’ box?

asked by: Scott C

0

Expert Reply:

Yes, you can use the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter # C32DR with your 2021 F-350. However, it is possible you will not be able to make a full 90 degree turn since you have the short bed, so that is something you need to be aware of. If you have a 5th wheel with a tapered nose it is unlikely clearance will be a problem.

expert reply by: Robin H

0

Answer 1

The Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3139 has an 8" offset and is designed for use with short bed trucks like your 2014 Ford F-250 but there are a couple of other facets you need to be aware of as well. This…

view full answer...

Answer 2

An adapter like the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3139 is what I recommend for your truck. Using this 8-inch adapter gives you more clearance between your trailer and the cab of your truck.

view full answer...

Answer 3

The two SumoSprings you mentioned are the same but for their weight capacity of 1,000 lbs vs. 1,500 lbs; so for your 2020 Ford F-150 4WD that is towing a 5th wheel trailer the best option is definitely going to be the 1,500 lb spring: - SumoSprings…

view full answer...

Answer 4

Actually the Timbren Rear Suspension Enhancement System Item #TFR1504E that you referenced is the recommended kit for both the 4x2 and 4x4 versions of your 2018 Ford F-150 FX4. This kit has a spacer that you can remove if you find that the ride is…

view full answer...

Answer 5

I prefer the rubber spring style of suspension enhancement as it does not require you to inflate air bags at any point which makes it much more convenient. Since the Timbrens have a reputation as being somewhat harsh when the truck is unloaded I…

view full answer...

Answer 6

The Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #C32DR and part #C92DR are the exact same. This hitch is designed to attach to a gooseneck hitch and provide a connection for a fifth wheel hitch. Therefore, if you have…

view full answer...

Answer 7

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 8

What you said is correct. Since you have the factory prep package, the only other thing you will need to use the CrossWing #C32DR is the Curt Ball and Safety Chain Loop Kit #C38CR (60639). Safety chains are not required for the 5th wheel hitch so…

view full answer...

Answer 9

The cone that you see in the picture you attached of the Curt Crosswing part #C86JR is there to help align it with the rest of the hitch when you back the vehicle up into it and lower it down with the jacks. This ensures it is completely seated and…

view full answer...

Answer 10

Hey Jim, congrats on the new truck and fifth wheel - looks great. Our rule of thumb is that you want a minimum of 6" of clearance between the top of the bed rails and the bottom of the trailer loft. You should be just fine to use the bottom hole…

view full answer...

Answer 11

Jameson's wording could've been better but what he meant was that there isn't any way to adjust the connection point of the Curt CrossWing Lightweight #C92DR since it only allows for you to raise of lower the hitch head. In the question…

view full answer...

Answer 12

Yes, they do make the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR in a version that can be used with a B&W Turnover Gooseneck ball. That is the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter #C32DR. The…

view full answer...

Can 2021 Ford F-350 Short Bed Use Curt Crosswing

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching