Compatibility of SumoSpring Rebel Helper Springs for 2019 Ford F-250 With Underbed Gooseneck Hitch

Question

Question:

2019 F-250 I’m using to pull my fifth wheel. Andersen hitch, bandw mount. Would I be able to mount these springs along With my hitch system.

asked by: Daniel R

0

Expert Reply:

On your 2019 Ford F-250, the SumoSprings Rebel Custom Helper Springs - 2 Piece - Rear Axle # SSR-128-47-2 are a fit for your underbed B&W Turnoverball gooseneck hitch. This not only will help when using your gooseneck but can also with your 5th wheel adapter hitch. They are a great option for your truck doing heavy duty towing. If you often travel without a trailer, they may be a little stiff and instead you may want to consider # SSR-129-40-2.

expert reply by: Jason S

0

Answer 1

What I think you are asking is, will you need a slide type hitch for the 2022 Ford F-250 Super Duty with the short bed, 6-3/4' length that has the OEM Prep Package (puck system) when towing a 5th wheel RV. The short answer is no you do not have…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 11

Here is a list of the bump stop replacements we have which fit your 2024 Ford F-350. If you can tell me how you plan to use your F-350 I can give you my personal recommendation for the option which works best for you. Timbren Front 2WD #TFF350SD2 4WD…

view full answer...