Recommended Trailer Hitch and Bike Rack for 2013 Nissan Maxima

Question

Question:

Have questions about installing a hitch receiver for Nissan Maxima 2013. I found one on your website for $ but my question besides that what else would I need to carry 2 light mountain bikes

asked by: Michelle

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C11352 is an excellent option for a 2013 Nissan Maxima. It has a 1-1/4" receiver tube opening with class I rating so it will work with any bike rack that has these features and there are plenty to choose from. The Thule Camber 2 Bike Rack part # TH9058 is our most popular option as it offers premium features at a very reasonable price. It would work wonderfully with two mountain bikes.

expert reply by: Conner L

0

Answer 1

As of February 2023, we do not have a hitch for your 2011 Nissan Altima Coupe. The Curt hitch #C11352 that you referenced will only fit the Altima Sedan and not the Coupe.

view full answer...

Answer 2

As far as quality, all of the hitches for the 2013 Nissan Altima sedan are on par with each other. The Draw-Tite hitches (#24796) undergoes additional voluntary testing procedures that other hitches do not. But both hitches, including Curt hitch…

view full answer...

Answer 3

It is not uncommon for a hitch to fit multiple vehicles. This is the case with Curt trailer hitch #C11352. It does indeed fit the Nissan Maxima and Altima sedan. I have included a link to the installation instructions for you. If you plan on doing…

view full answer...

Answer 4

I have a solution to transport 4 bikes, but because your 2016 Nissan Altima has the 1-1/4" Curt Receiver #C11352 which is a class 1 hitch you are limited to using a 2 bike carrier. Unfortunately, you cannot use the Saris Freedom 4 Bike Platform…

view full answer...

Answer 5

The trailer hitch I recommend for your 2015 Altima is the Draw-Tite Sportframe Trailer Hitch Receiver, part #24796. I recommend this hitch because the Curt Trailer Hitch, part #C11352 requires the use of a safety strap like part #18050 when it is…

view full answer...

Answer 6

First, the 636 pounds of tongue weight is the dry tongue weight and will increase once the trailer is loaded and ready to tow. Since the dry weight is 6,200 pounds and the dry tongue weight is 636 pounds that means that the tongue weight is 10.25…

view full answer...

Answer 7

It is fairly rare for a weight distribution system's head assembly to require replacement unless the system was mis-matched to the trailer, set up incorrectly or if the trunnions were allowed to get really worn down (which really should not…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Recommended Trailer Hitch and Bike Rack for 2013 Nissan Maxima

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching