What is Normal Wear for Trunnion Weight Distribution System
Question:
Hi, Just wondering how much wear and tear to the knobsinch on the trunnion bar is acceptable before considering replacement? And, if replacing due to wear and tear, should the head assembly be replaced as well?
asked by: Mike
Expert Reply:
It is fairly rare for a weight distribution system's head assembly to require replacement unless the system was mis-matched to the trailer, set up incorrectly or if the trunnions were allowed to get really worn down (which really should not happen either).
Proper selection, set-up and routine lubrication of the system should mean that after a good bit of use the black powder coat finish may be worn off but certainly no metal material should be worn away. Lubrication according to the particular system's instructions is important to both proper operation and longevity.
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Review of Blue Ox Weight Distribution Hitch - Hitch Head for Underslung Couplers - BXW4012
- Q&A: Difference Between Underslung and Overslung Coupler For Weight Distribution System
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Shop: Replacement Head for Blue Ox SwayPro Weight Distribution Systems - Trunnion Bar
- Shop: Replacement Head for Blue Ox SwayPro Weight Distribution w/ Pins - Underslung - Trunnion Bar
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - Underslung - 10K GTW, 1K TW
- Shop: Replacement Head for Blue Ox SwayPro Weight Distribution System w/ Pins - Trunnion Bar
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Replacement Blue Ox TrackPro Weight Distribution Head
- Shop: Replacement Head for Blue Ox SwayPro Weight Distribution Systems - Underslung - Trunnion Bar
- Video: Review of Blue Ox Replacement SwayPro Head - BXW4011
- Q&A: Will The Curt C17507 Replace The Head On An Older 17342 Weight Distribution System
- Q&A: Curt 1,000 Pound or Fastway 800 Pound Weight Distribution for a 7,000 Pound Travel Trailer
- Video: Trailer Hitch Installation - 2013 Nissan Altima - Curt
- Video: Cleaning Weld Nuts for Trailer Hitch Installation
- Video: Trailer Hitch Installation - 2013 Nissan Altima - Draw-Tite
- Shop: Trailer Hitch
- Q&A: Comparing Draw-Tite and Curt Trailer Hitches for a 2013 Nissan Altima Sedan
- Q&A: Difference Between EcoHitch, Curt and Draw-Tite 2 Inch Hitches for 2020 Subaru Forester
- Q&A: Draw-Tite Trailer Hitch vs Curt Trailer Hitch for 2020 Jeep Gladiator
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: B&W Continuum Weight Distribution System Review
- Search Results: hitch
- Article: My Trailer Hitch Doesn't Fit
- Shop: Roof Rack
on Weight Distribution Hitch
