Will Kodiak 10" Disc Brake Kit Fit UFP DB-35 Hub/Rotor
Question:
Good day I currently have a Karavan trailer with dual 3750 torsion axles. My current hub with is a ufp dB-35 10” rotor hub takes bearings L68149/L44649 and races L68110/L44610 with a seal of 2.56/1.68 and 1.98 dust cap. I want to upgrade my brakes to the Kodiak kit 10” selling for $480 that work with 13” rims. My question is that the Kodiak hub/rotor in this kit take the same bearings with same inner diameter but it takes a different race and the seal is slightly different. Is this going to be a problem will it still work on my axle? Would I run my current size seal with the Kodiak hub ? And is one race size being different any issue?
asked by: Lou C
Expert Reply:
The Kodiak Disc Brake Kit part # K2HR35DS will work to replace a UFP DB-35 Hub/Rotor if you change out the seal to the Double Lip Seal for 3,700-lb Marine Hubs part # 168255TB. The races won't be an issue since they are specific to the hub.
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Over-the-Hub - Stainless - 3,500 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Search Results: ufp caliper
- Search Results: ufp
- Shop: Replacement Caliper for Dexter 10" Brakes - Driver's Side
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Trailer Hitch
- Q&A: Will Kodiak Hubs/Rotors Work With UFP Calipers
- Video: Review of Kodiak Trailer Brake Parts - Brake Hose 1.5 Foot - BH-3MFS90-1-5
- Search Results: winch cable
- Shop: Base Plate for Tow Bar
- Search Results: karavan trailer parts
- Search Results: blue ox
- Search Results: blue ox base plates
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Can Disc Brake Actuator be Used with Trailer Drum Brakes
- Q&A: How to Convert a Drum Brake Actuator Titan Model 6 to a Disk Actuator
- Video: Ultimate Trailer Jack A-Frame Topwind Jack Review
- Video: Roadmaster Nighthawk All Terrain Tow Bar Installation - 2022 Ford Ranger
- Video: Tow-Rax Aluminum Storage Cabinet Review
- Q&A: Recommended Spare Parts To Replace UFP Hubs With Rotors And Calipers
- Q&A: How to Determine Correct Replacement Disc Brakes for EZ Loader Boat Trailer for Salt Water
- Search Results: brake pads
- Q&A: Stainless Steel Kodiak Disc Brake Kit for 10 inch Rotor and 5 Lug Bolt Pattern
- Video: Dutton-Lainson Trailer Winch - Brake Hand Winch - DL14881 Review
- Video: Review of Fulton - Trailer Winch - F501210
- Shop: Trailer Wiring
on Accessories and Parts
