Will TorkLift Rear Camper Tie-Downs Interfere with Dual Exhaust on F-350 Diesel

Question

Question:

I have a 2014 F350 supper duty, crew cab,4 wheel drive, 8 ft bed, its a diesel, factory installed hitch, with factory installed 5 th wheel. will the rear tie downs for the factory installed hitch hit the exhaust pipe or right side. because of the diesel, there are two pipes coming out. thank you,

asked by: Jeffrey S

1

Helpful Expert Reply:

The factory dual exhaust pipes on the passenger's side of your 2014 Ford F-350 will not interfere with the installation of the TorkLift Custom Frame-Mounted Rear Camper Tie-Downs, part # TLF3006. I confirmed with Torklift that these are a fit for your 4x4 truck with the 8 foot bed, crew cab, with no board or step present underneath of the bed, and with the factory installed hitch.

The correct TorkLift Front Camper Tie-Downs for this application are part # TLF2016.

expert reply by: Carla M

1

Answer 1

The Laramie trim level on your Ram 1500 does not affect the fit of TorkLift camper tie downs, but other equipment can affect what will work on your truck. The link provided will take you to our main page for camper tie-downs for the 2014 Ram 1500.…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 4

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 5

For your 2007 Dodge Ram 3500 Dually with an 8' bed I recommend the HappiJac Truck-Mounted Camper Tie-Downs #LC182908-182928 you were already looking at along with some turnbuckles like the #LC182898. These camper tie-downs permanently mount to…

view full answer...

Answer 6

Using an additional extender, like part #HE12, is very different than the rack, like part #K2TMC201, having a lengthy shank. The extenders like part #HE12 are usually made of two different sized pieces of steel that are welded together. The HE12 uses…

view full answer...

Answer 7

The only hitch extension we offer that is compatible with weight distribution hitches is the Titan Hitch Box Extension and Reducer #RP45292. This product is designed to fit hitches with a 2-1/2 inch receiver opening and then reduces down to a 2 inch…

view full answer...

Answer 8

For your 2008 Ford F-250 with a 6-3/4' bed you'll need the TorkLift Camper Tie-Downs - Front #TLF2012 and Rear #TLF3004. If you have running boards or steps that extend under the bed then you'll need to remove them in order to fit the…

view full answer...

Answer 9

For the front tie-down, you'd use the Torklift #TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed. If you have the factory hitch, use #TLD3113 for the rear, or if you have the…

view full answer...

Answer 10

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2015 Ford F-350 with factory hitch and 6-3/4' bed is part #TLF2012 for the front and part #TLF3006 for the rear. In order to secure your truck bed camper to these tie-downs I…

view full answer...

Answer 11

For the install of the Torklift #TLF3006 the directions suggest using a hammer and chisel to remove the excess welding flash inside the ends of the factory hitch to allow the tie down to fully seat. We've heard that a dremel actually makes the…

view full answer...

Answer 12

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Will TorkLift Rear Camper Tie-Downs Interfere with Dual Exhaust on F-350 Diesel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching