Availability of TorkLift Camper Tie-Downs for 2014 Dodge Ram 1500 Laramie

Question

Question:

I am looking for TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2014 Dodge Ram 1500 Pickup, Laramie Model. Your website says this product will not work with Laramie Models. Do you have others that will work? HELP!!

asked by: Don D

0

Expert Reply:

The Laramie trim level on your Ram 1500 does not affect the fit of TorkLift camper tie downs, but other equipment can affect what will work on your truck.

The link provided will take you to our main page for camper tie-downs for the 2014 Ram 1500. You will just need to select your particular version of the 1500 from the drop-down menu at the top of the page (Select Vehicle Style). It is necessary that your Ram 1500 Laramie be a 4WD truck and NOT have running boards that extend past the cab.

For example, if your Ram meets the above criteria and has a factory-installed hitch you can use parts # TLD2121 and # TLD3107.

expert reply by: Adam R

0

Answer 1

The factory dual exhaust pipes on the passenger's side of your 2014 Ford F-350 will not interfere with the installation of the TorkLift Custom Frame-Mounted Rear Camper Tie-Downs, part #TLF3006. I confirmed with Torklift that these are a fit for…

view full answer...

Answer 2

Yes, the front Torklift tie down part #TLD2121 is a confirmed fit for your 2019 Ram 1500 Classic with the factory hitch and not running boards or steps. For the matching rear you'd want the part #TLD3107.

view full answer...

Answer 3

The items you list, the TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLD2121 and #TLD3107, are a confirmed fit for the 2012 Ram 1500 with 6-1/2 Foot Bed, 4WD, Quad Cab - without board or step underneath truck bed and with a factory installed…

view full answer...

Answer 4

A frame-mounted camper tie-down system will generally be a better option than a clamp-on type since it uses the strength of the truck's frame to secure the slide-in camper. For your 2017 Ram 1500 we have a number of such frame-mount kits from…

view full answer...

Answer 5

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Availability of TorkLift Camper Tie-Downs for 2014 Dodge Ram 1500 Laramie

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching