Correct Engine Block Heater for 2019 Kia Sportage

Question

Question:

Hi, can you tell me which block heater to get for a 2019 Kia Sportage, your web site says heater not confirmed for my car. Thanks

asked by: Greg

1

Helpful Expert Reply:

I checked with Kat's and the correct Kat's Heaters Custom Fit Engine Block Heater for a 2019 Kia Sportage with 2.0 or 2.4 engine is part # KH11812.

expert reply by: Conner L

1

Answer 1

The underside of the standard 2023 Hyundai Elantra is different than the hybrid model of the 2023 Hyundai Elantra Hybrid, which is why the #DT75MR won't fit. There is a hitch designed specifically for the hybrid which has different…

view full answer...

Answer 2

Yes, we do. For your 2023 Hyundai Elantra sedan, I recommend the Curt Trailer Hitch item #C53NR. This hitch is confirmed to fit all models of the 2023 Elantra except for the N and N-Line trims. The Curt Trailer Hitch item #C53NR is custom fit and…

view full answer...

Answer 3

The cartridge to use to install the Kat's heater part #KH11812 that you referenced is on the front side of the engine on the passenger side as you face the engine with the hood up.

view full answer...

Answer 4

The Kat's Heaters engine block heater for the 2013 Kia Optima is part #KH11812 and Kat's recommends installing it in the block expansion port at the left/front of the engine (driver's side front). Here are the install…

view full answer...

Answer 5

I do have an image showing the Draw-Tite Trailer Hitch Receiver #DT75MR mounted below the red reflector on a Hyundai Elantra. I hope this helps you understand where the receiver will sit on your 2022 Hyundai Elantra N as we do not have the…

view full answer...

Answer 6

They rate the tongue weight on hitches based on how the vehicle would most likely be used. So the hitch you have that has a 500 lb tongue weight rating is designed to handle exactly 500 lbs when used in normal towing situations. So long story short,…

view full answer...

Answer 7

For your 2019 Jeep Cherokee with a 3.2 liter engine the Kat's heater part #KH11812 is the correct part you'd need. I checked with Kat's and they recommend the Left Rear or Right Rear cartridge. So basically the cartridges on the left or…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Correct Engine Block Heater for 2019 Kia Sportage

Product Page this Question was Asked From

Continue Researching