Hitch Mounted Cargo Carrier with Ramp that Doesnt Have Speed Restriction

Question

Question:

I am interested in the: Flint Hill Goods Cargo Carrier with Ramp - 2 Hitches - 500 lbs Item FHG77ZR. The specs in your description says maximum speed: 55 mph. Does this mean you cannot exceed 55 mph while this carrier is on your vehicle?

asked by: Carol

0

Expert Reply:

Yes, Flint Hill Goods does not recommend travelling faster than 55 mph when the Flint Hill Goods 30x50 Cargo Carrier with Ramp # FHG77ZR is installed in the hitch.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 9

We do indeed have the exact tail light kit you need for the 24x60 Reese Cargo Carrier #63153: - Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers #20174 This light kit is a confirmed fit for the Reese cargo carrier so it is exactly…

view full answer...

Answer 10

With the size of your Champion Generator 200953(23.4" wide, 27.9" long and 21.7" tall I recommend using the 32x48 Reese Solo Cargo Carrier #PS1040100. This has a 47-3/4" long by 31-3/4" wide inner tray and can support up to…

view full answer...