Thread Size of etrailer Anti-Rattle Pin and Bike Rack Solution Compatible with 2-1/2 Hitch Receiver

Question

Question:

Yes, if you could point me to an acceptable solutuon I would appreciate it!

asked by: Tom H

0

Expert Reply:

The Anti-Rattle Hitch Pin and Clip # e98911 has M16 x 2 threads so they won't fit with a Thule bike rack unfortunately. From the research I've done in the past Thule has an anti-rattle hitch pin that doesn't match any other bike rack either so it would be difficult to find one that will work with it. I've also checked with Thule in the past and they have said that if any adapter is used in a 2-1/2" hitch receiver aside from one that they make (which they don't have one) then it would void the warranty on the bike rack.

Hollywood Racks does have a solution for using a bike rack with a 2-1/2" hitch though so if you're interested in that I'd be more than happy to help you pick one out.

expert reply by: Jon G

0

Tom H.

5/5/2020

Yes, if you could point me to an acceptable solutuon I would appreciate it!

Reply

Jon G.

5/5/2020

Glad to hear it! Hollywood Racks came out with the 2-1/2" to 2" Reducer Sleeve # HRHA-2 which allows you to safely carry any of their bike racks that have a solid 2" shank. The way that this is designed also gives you the ability to use the anti-rattle hitch bolt as well. One of the most popular bike racks that Hollywood Racks sells is the Sport Rider SE #HLY74FR which is a little more basic in look and design than most of the Thule bike racks, but it includes the the common features among platform racks like tilting, folding, and bike/rack locks. This uses hooks that go over the bike frames as well as straps over the wheels to secure the bikes in place. Hollywood Racks also has a wheel mount rack that doesn't make contact with your bike frame in the event that you have a bike with a more sensitive frame. The TRS comes in the standard version # HR3500 as well as the E-Bike version # HR3500E which is basically just more heavy-duty. The TRS uses hooks for the tires and then straps for the wheels to secure the bikes plus it also includes the basic tilting/folding and bike/rack locks as well. If you're needing a different type of bike rack just let me know and I can help you choose the best option for your application from the linked selection of Hollywood Racks bike racks. I've also included some video reviews of these bike racks for you to check out.

Reply

Answer 1

For your Rola TX-104 4-Bike Rack for 2" Hitches - Tilting #59401 does not have a specific lock core it uses. If you know the key number you had, then I've linked all our replacement options to help. If you do not know the key number, I…

view full answer...

Answer 2

For the Swagman XTC-2 bike carrier #S64670 the correct anti-rattle part is #S64029 which not only keeps the rack steady in your hitch but also provides a lock for security. Bike rack makers choose not to use a common size and thread pitch for their…

view full answer...

Answer 3

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 4

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle straps…

view full answer...

Answer 5

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

Most of the time when a tow setup is porpoising with a weight distribution system all you have to do is add a bit more spring bar tension to minimize the porpoising. With an Equalizer system you would need to angle the spring bars down further to add…

view full answer...

Answer 8

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

view full answer...

Answer 9

On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...