Will the Thule Hull-A-Port Work on Malone Air Flow Cross Bars

Question

Question:

Hello, I was just wondering if the Malone Air Flow 2 Bars accept the same adapters as the thule aero bars. Particularly I am looking to pair my Thule Hull-A-Port XTR with my malone air flow 2 bars. It certainly appears that the standard outfittingis not appropriate. Thats when I ran across the following adaptor on etrailer:Thule Xadapt12 Watersports Adapter for AeroBlade, AeroBlade Edge or WingBar Evo Crossbars Item # THXADAPT12 I am assuming that the tracks for the thule and the malone are interchangeable but wanted to double check before I ordered one. Thanks.

asked by: Alan

0

Expert Reply:

Great News! The Thule Hull-A-Port XT Kayak Carrier TH848 is 100 percent compatible with the Malone AirFlow2 Roof Rack systems like part # MPG216.

The Hull-A-Port uses the clamps on the bottom which will grab a hold of the Malone bars for an excellent fit.

There will be no need for an adapter for the two to work together.

expert reply by: Randy B

0

Answer 1

Yes, the Thule Hullavator Pro Kayak Carrier part #TH898 will work with the Malone AirFlow2 Roof Rack either using the integrated channels or the wrap-around style clamps. However, the Hullavator requires that the crossbars extend at least 4"…

view full answer...

Answer 2

I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like #INB137.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 10

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Will the Thule Hull-A-Port Work on Malone Air Flow Cross Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching