Can Fastway Coupler Be Keyed Alike to Hitch Receiver Lock?

Question

Question:

Fastway Universal Trailer Coupler Lock # DT25013KA Is there a hitch and receiver lock that’s keyed to the coupler lock?

asked by: Bob C

1

Helpful Expert Reply:

The Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # DT25013KA you referenced does not have a keyed alike option to a hitch receiver lock like the Fastway Trailer Hitch Receiver Lock # FA86-00-3160.

expert reply by: Jason S

1

Answer 1

I have a complete solution for you but the Fastway Trailer Hitch Receiver Lock part #FA86-00-3160 can't be keyed alike down the road. Like alot of the locks we offer there are keyed alike varieties available. These should be purchased at the…

view full answer...

Answer 2

For a lock that will fit your leverlock coupler I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers #FA86-0015-318. This uses a ball and shackle to keep your coupler secure and will…

view full answer...

Answer 3

To secure your PJ Trailer that's equipped with the Demco eZ-Latch Coupler #DM14040-81 I highly recommend the Fastway Universal Trailer Coupler Lock #FA86-0015-318, which doesn't require a lip on the coupler for a proper connection.…

view full answer...

Answer 4

The Fastway Universal Trailer Coupler Lock is offered with many part numbers, for instance #FA86-0015-316, #FA86-0015-318, or #FA86-0015-313. Each part number includes keys that correspond the the last 3 digits of the part number. You could order…

view full answer...

Answer 5

There are extra keys that can be purchased for the Fastway Universal Trailer Coupler Lock. Once you have the lock and know your key number you can order extras; for example you'd want to order #FA-KEY-305 if your key number had 305 on it or…

view full answer...

Answer 6

There are no replacement keys available for the Gorilla Guard coupler locks; the best we can offer is to remove it and replace the lock itself with one that has replacement keys available, the Fastway Universal Trailer Coupler Lock for…

view full answer...

Answer 7

Yes, you can order the Fastway Universal Trailer Coupler Lock to be keyed alike to fit multiple trailers and use one key for all the locks. This lock is offered with multiple part numbers so you can order multiple locks with the same keys if you…

view full answer...

Answer 8

You can certainly change your trailer tires to a narrower 205mm width as long as your wheels are 6- or 6-1/2-inches in width. These are the only size wheels that can take both 225mm and 205mm tire sizes. Please refer to the linked article on tire…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...