What Bearings and Seals do I Need for my Al-KO T-44 Axle
Question:
I have a travel trailer with Al-co T44 4400# axels. I am looking for the correct bearings/seals. Breaks are 10x2 1/4 m Thanks
asked by: Jeremy
Expert Reply:
Based on my research, the AL-KO T-44 axle spindle on your trailer uses the # L68149 inner bearing and # LM67048 outer bearing. I recommend verifying this on your trailer by simply pulling the hubs and checking for the numbers that should be stamped onto the bearings themselves. For the seal I have found typically the Grease Seal part # # RG06-050 is what you need. It has an inside Diameter of 1.719" and an outside diameter of 2.565" This can be verified by checking when you pull the hubs to confirm the bearing numbers.
If this is the case then the above parts are going to be exactly what you need to replace your current bearings and seals.
This is the best time to also switch out the brakes if they have been covered in any grease or to refresh them. To do this use the Electric Trailer Brake Kit - Self-Adjusting - 10" part # AKEBRK-35-SA these will give you brand new assemblies rather than trying to replace components as they fail.
I have added the videos I have done showing how they come apart and how the brake replacement goes.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Replacement Trailer Hub Bearing - LM67048
- Q&A: Bearing Replacements for AL-KO T44 Trailer Axles
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Q&A: Bearing Replacements for L68149 and LM67048
- Q&A: Replacement Inner Bearing & Race for 2012 Keystone Cougar with Al-Ko T44 Axles
- Q&A: Can etrailer Electric Trailer Brakes be Used in Place of Dexter Brakes
- Q&A: Torque Specs for Wet Bolts for Dexter Axle E-Z Flex Suspension Kits
- Q&A: Hub and Drum Assembly for AL-KO T-52 Axle
- Q&A: Replacement Brake Assemblies and Grease Seals for Dexter 4400 lb Trailer Axle
- Search Results: trailer wheels center caps
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: trailer brakes
- Shop: Trailer Wiring
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Shop: Brake Controller
- Search Results: bearing buddy
- Search Results: l68149
- Shop: Suspension Enhancement
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: l44649