Does Timbren 1/2" Spacer Come with Longer Mounting Hardware

Question

Question:

I currently have the timbrens installed. But I need the 1/2 spacer. Does the 2 spacers come with the mounting bolts too or just the spacers?

asked by: Jeff

0

Expert Reply:

The Timbren 1/2" Spacer # TA25722-90P00 comes in a quantity of 1 and only includes the spacer. If you require longer hardware then you'll need to visit your local hardware or home improvement store for that, which is actually the same thing we do when we install the spacers that don't already come with a suspension kit.

expert reply by: Jon G

0

Answer 1

I spoke to TorkLift and the holes needed for the #TLA7310S will be 7/16". With leaf springs being a hardened steel, it is suggested that a harder drill bit is used. We do actually have #TLA7311S that would come with two 7/16" cobalt…

view full answer...

Answer 2

Yes, you can use the Timbren Rear Suspension Enhancement System, #TTORSEQ on a lifted 2006 Toyota 4Runner. However, you will need an additional component(s) to address distance variation from factory stock arrangement, such as the Timbren…

view full answer...

Answer 3

The best option for suspension enhancement for your 2018 Ford F-150 to help with both sag and stability is definitely the RoadActive Suspension kit over air bags, and there are a number of reasons for that. The reason is the RoadActive Suspension…

view full answer...

Answer 4

My contact at RoadActive was able to confirm that using either the white 25 disk or the black 40 disk when installing the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-B will not raise your 2020 Ford F150 Lariat more than 1.5…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 11

The best air bag kit for your 2020 Ford F-250 Super Duty with a single rear wheel are the Firestone Ride-Rite Air Helper Springs because they are the strongest, most durable air bags on the market to provide you with optimal support for your…

view full answer...

Does Timbren 1/2" Spacer Come with Longer Mounting Hardware

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching