Can the Bulldog Hidden Winch Mount be Used with Other Manufacturer's Winches

Question

Question:

Will this product work bulldog winches or will it work with other brands like Badland ext....

asked by: Patrick P

0

Expert Reply:

Great News! The Bulldog Winch Off-Road Winch Mounting Plate part # BDW23001 uses the very common bolt pattern of 10" x 4.5". The holes are also oblonged front to back a little (about 3/4") to give you some freedom to move the winch forward or rear to suite the installation.

Check out the video I linked that Ellen did here at etrailer.

expert reply by: Randy B

0

Answer 1

The Bulldog Winch Off-Road Winch Mounting Plate for Toyota Tacoma #BDW23001 weighs 35-lbs. There is not a relocation kit for the power steering cooler line when installing these winch plates, but it's recommended typically that you just bend the…

view full answer...

Answer 2

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 3

While Bulldog does not have a different winch mount for your 2020 Tacoma TRD Off Road, we do have reviews(see images) of the Bulldog Winch Off-Road Winch Mounting Plate for Toyota Tacoma Gen III 2016 to 2019 #BDW23001 being installed on a 2020 and…

view full answer...

Answer 4

If you're looking for a Jerry can holder to go with a basket, that limits what you can mount to your roof. We don't carry can holders that are compatible with baskets like the OffGrid, part #Y07138. Instead, you can use the Yakima LockNLoad,…

view full answer...

Answer 5

Thanks for the picture! I reached out to my contact at Lippert and you will need the replacement motor #LC183058 which will be a direct replacement for the HappiJac 70425-004.

view full answer...

Answer 6

Yes the Smittybilt winch you mentioned would fit on the Bulldog Universal Mounting Plate for Trailer Winches part #BDW20291 that you referenced.

view full answer...

Answer 7

The Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles #BDW20011 is a pretty universal fit but I have some things for you to double check with your Ramsey RE12000 winch prior to using this for your winch as I wasn't able to find any…

view full answer...

Answer 8

If you'll look at the provided customer review by Mike H, you'll see that he was easily able to reinstall skid plate after the Curt #31313 Front Mounted Receiver was installed on his 2008 Toyota Tacoma. No modifications were needed. I've…

view full answer...

Answer 9

The Curt front mount receiver, #31313, is a front mount receiver. You can also call it a trailer hitch even though it is at the front of the vehicle and not the back. As far as installation notes for this hitch, I show that no drilling is required or…

view full answer...

Can the Bulldog Hidden Winch Mount be Used with Other Manufacturer's Winches

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching