Is the Rhino-Rack Batwing Awning Compatible With Yakima Crossbars

Question

Question:

What part do I need to make the awning compatible with the T rails on my Yakima crossbars? Bat Wing Awning - Yakima Crossbars

asked by: Alli

0

Expert Reply:

If you have channels in your Yakima Crossbars, the Rhino-Rack Batwing Awning Driver's side part # RR33100 or Rhino-Rack Batwing Awning passenger side part # RR33200 will fit the bars without any adapters. The awning will install on Aero cross bars that have top channels and extend past the feet of the roof rack with the included t-bolt hardware. I have attached a video for your reference.

expert reply by: Heather A

0

click to enlarge

Answer 1

The red arrow you are referring to in the accompanying photo is a part of the mounting hardware that comes with the now-discontinued RR32105, which is the entire awning and not just one part. You would not be able to attach a Batwing Awning #RR33200…

view full answer...

Answer 2

Rhino-Rack confirmed that their Batwing Awning #RR33200 can be mounted on round Yakima roof rack bars using the adapter kit #RR31105 that was designed originally for use with their now-discontinued Foxwing awning. For a secure fit the Batwing…

view full answer...

Answer 3

I checked out all of the Rhino Rack roof racks that fit the top of a camper shell and they all have channels on the tops of the crossbars so the Rhino Rack Batwing Awning part #RR33200 would fit and work well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Is the Rhino-Rack Batwing Awning Compatible With Yakima Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching